In-Ovation braces: design features, indications, cost

In order to correct misaligned teeth in an adult, continuous influence is required over a long period of treatment. For these purposes, a special non-removable device was developed - a bracket system. Modern orthodontic apparatus allows you to immerse the tooth in the bone, tilt, lift or rotate it around its axis. High-strength ceramic self-adjusting braces In-Ovation are installed at the Implantmaster clinic by specialists of the highest category at reasonable prices

In-Ovation braces are ligature-free, and their main difference is that their base is made of solid high-quality ceramics. This feature led to the identification of a number of undeniable advantages of such a system. The only series of self-adjusting ceramic system includes braces:

• C – vestibular modification.
• L – lingual modification.
• R – vestibular modification.

The price of the In-Ovation device depends only on the selected design option and suppliers. And the cost of treatment with this technique directly depends on the specific clinical case of the patient and the qualifications of the attending orthodontist.

In-Ovation C ceramic braces

The In-Ovation C brace system is ceramic. Their main difference from other versions of the series is the aesthetic indicator of visible braces. To manufacture the main components of the device, white solid ceramics is used, close to the color of tooth enamel. On teeth, due to its transparency, the system is almost invisible.

The material is coated with a special compound that prevents it from darkening under the influence of food, alcohol, tobacco and other substances. Therefore, there is no need to worry that the ceramics will lose transparency or become stained with food coloring. Also, do not worry about the formation of cracks and chips, since the material is very durable and reliable. Thus, the patient does not experience aesthetic discomfort from wearing the In-Ovation braces system.

Need for correction

Every experienced specialist in the field of dentistry will, without hesitation, make an unequivocal conclusion that bite restoration and correction of dental defects is a necessary and important procedure.

If we delve deeper into the medical point of view, an abnormal bite can lead to irreversible consequences:

• disturbances in the process of chewing food;
• pathologies of the temporomandibular joints;
• systemic damage to periodontal tissue;
• chronic headache;
• clicking of the jaws when talking and while eating.

Crooked teeth can lead not only to problems in the oral cavity, but also to disrupt the psychological state. An incorrect bite develops complexes that cannot remain without consequences.

Any person wants to be attractive and not experience discomfort in all life situations. A perfectly straight dentition and a snow-white smile are an important and, perhaps, the main detail in the beauty of a person’s face, which means that the health of the oral cavity and teeth requires careful care.

Read reviews about the cream for fixing dentures Rox, about its composition and principle of action. Come here if you are interested in the device and rules for using the Philips Sonic ultrasonic toothbrush.

Follow the link https://dr-zubov.ru/ortodontiya/prikus/primenenie-miogimnastiki.html to familiarize yourself with myogymnastics exercises for the orbicularis oris muscle.

Our team of doctors

Maxillofacial surgeon, Implantologist

Bocharov Maxim Viktorovich

Experience: 11 years

Dental surgeon, Implantologist

Chernov Dmitry Anatolievich

Experience: 29 years

Orthopedist, Neuromuscular dentist

Stepanov Andrey Vasilievich

Experience: 22 years

Endodontist, Therapist

Skalet Yana Alexandrovna

Experience: 22 years

Orthopedic dentist

Tsoi Sergey Konstantinovich

Experience: 19 years

Dentist-orthodontist

Enikeeva Anna Stanislavovna

Experience: 3 years

Differences from analogues

In Ovation braces were developed by a company called GAC Dentsply. They have many distinctive features from competitors' products. First of all, this is the only type of braces without ligatures, all parts of which are made from solid ceramics of the highest quality. Due to the absence of plastic, they last longer and do not break.

To make the orthodontist’s work more convenient, each plate is numbered on the base, so you can now select the right part faster. For better adhesion to the enamel surface, the base of each part is coated with a special abrasive substance. As a result, the risk of accidental peeling of elements is minimized even under strong mechanical stress.

Metal braces (R) are most often made of medical steel, so they do not cause allergic reactions. This material is durable and inexpensive. Ceramic options (C) look more attractive due to the fact that they are almost transparent and invisible. The ceramics are additionally protected from damage by zirconium oxide. Lingual analogues (L) are not visible to others even upon close examination, therefore they are in great demand among public figures. They are produced strictly to order for a specific patient and help cope with even the most complex bite pathologies.

In-Ovation C or L bracket systems?

Visitors to the Implantmaster clinic often raise the question of discreet treatment. Therefore, it is worth making a choice between vestibular and lingual braces. Both options have excellent aesthetic properties. Class C has a special coating that can protect locks from the harmful effects of food dyes for a long time.

In-Ovation L are lingual braces. That is, these are orthodontic systems that are invisible to others and are installed on the inside of the teeth. This technique allows the treatment to be completely secretive. Also, compared to other braces, it has shown high effectiveness in severe clinical cases in patients with non-standard tooth surface shapes.

Manufacturer

Dentsply today is the largest concern, which was formed through the merger of similar companies in America, England and Sweden.

The company has been known on the market for more than 100 years. Specializes in the production, sales and distribution of a wide range of high quality dental products.

The company's factories have 22 centers in different countries to promote their products, and supply them to more than 100 countries on all continents. In March 1997, a representative office of the Dentplay concern was opened in Moscow.

This company is the only one in the world that has mastered the production of ligature-free orthodontic systems.

In-Ovation Type C or R brackets?

The In-Ovation C and In-Ovation R braces are a vestibular modification of the line. The In-Ovation R's structure is made of metal. It has a unique patented latch that allows you to more effectively control the elimination of dental malocclusions. The device acts very delicately on the jaw, forcing the teeth to move into the desired position. For arcs, a specific program is set in the memory of the metal wire, according to which they precisely work.

A special latch made it possible to reduce the duration of the patient’s appointment, and also, thanks to its spring properties, provides an additional way to influence the working arc. This will improve the healing process and reduce it to a minimum.

The device is small in size and can be used to install arches of the required size at all stages of correction. The base of the braces is a specially manufactured triple SuperMesh mesh. It has a rough surface and is perfectly fixed. In some cases, traditional ligation is used, so In-Ovation R systems are equipped with special “wings”.

Whatever braces are installed, we can safely say that they are highly effective and reliable. It is best to have orthodontic devices installed by highly qualified specialists. The Implantmaster company offers only high-quality services using innovative equipment and methods of dental procedures at reasonable prices.

About the brand

DENTSPLY has been supplying the dental field with high-tech products for over a century.

Over such a long period of development, the corporation has achieved great success and has become the largest manufacturer of dental products in the world. The company's products are successfully sold in more than 110 countries.

The DENTSPLY brand has reached the pinnacle of leadership in the introduction of innovative products in the field of dentistry. For the successful development of the corporation, the following directions have been chosen:

• selection and implementation of new solutions in the field of dentistry;
• improving product characteristics;
• introduction of innovative products and tools.

Thanks to more than a century of development, the company has gained a good image, which has allowed it to gain the trust of thousands of specialists around the world.

Prices for In-Ovation braces

The approximate price for installing a brace system is indicated in the price list, but for more information, please contact the clinic.

Consultation with an orthodontist

• X-ray panoramic image
• Oral examination
• Drawing up a treatment plan with costs

Price : 2,000 ₽
*if treatment continues in the clinic according to the plan, the consultation is not paid

Author:

Installation

The installation steps for any of the listed systems are almost the same. The installation process takes approximately 2 hours and will depend on the complexity of the pathology.

The installation is divided into several stages, which in some cases may have minor differences, but are generally based on the main work:

1. Expert advice on your treatment plan . The doctor examines the oral cavity and determines the usefulness of braces in correcting a particular defect.
2. Diagnostics. A thorough examination of the complex functional system of teeth and jaws is prescribed. A circular X-ray of the dental units is required.
3. Preparatory manipulations . Complex procedures for the improvement of soft and hard tissues of the oral cavity.
4. Discussion with the patient of further stages of treatment.
5. Taking impressions of both the lower and upper jaws for the plaster fitting model.
6. Proper fastening of braces on a fitting plaster version by a dental technician.
7. Installation of a braces system by removing them from the model and moving them into the oral cavity using special tools.
8. Changing arches during treatment within the time limit set by the dentist.
9. Removal of the system and fixation of a structurally removable retention device.

System Features Innovation

• self-ligating systems: all models presented in the In-Ovation series assume independent regulation of the tension force of the arc for the natural movement of teeth in a row,
• unique base: the multi-level mesh structure of the base greatly simplifies the fixation of staples. The plates follow the anatomical shape of the teeth and are in maximum contact with their surface,
• combination of different ligation options: each bracket is equipped with a metal groove with a special lock and hooks. This design makes it possible to switch from self-ligating to ligature mode without any problems,
• high aesthetics of ceramic models: increased strength of the plates is achieved by treating them with silicon dioxide. Modern ceramics make it possible to select the shade of the material as accurately as possible so that the braces remain almost invisible on the teeth,
• rare visits to the orthodontist: the absence of ligatures in the system eliminates the need to constantly adjust the tension force of the arch. On average, you will have to visit a specialist’s office once every two to three months.

history of the company

The world-famous American-German company Dentsply Sirona (GAC) is the result of the merger in 2016 of 2 oldest companies founded in the nineteenth century - the American Dentsply International and the German Sirona Dental Systems (GAC).

Dentsply GAC specializes in the production of dental products - orthodontic and implantation systems and components, instruments, X-ray, hygienic and dental equipment, and restoration materials.

The number of Dentsply Sirona employees working in 40 countries reaches 16 thousand. The company has representative offices in 120 countries. Its developments are used by 600,000 dentists with 6 million patients.

Stages and timing of treatment

Installing Inovation C braces is practically no different from installing brackets from other manufacturers. Of course, when handling ceramics, extreme composure and concentration are required; an experienced specialist will not have any problems with this. At the first visit to the doctor, the patient is given an approximate treatment plan and its estimated duration. This is done on the basis of an examination and radiographic examination.

Before starting to correct defects, it is imperative to eliminate all dental diseases: periodontitis, periodontal disease, stomatitis, caries, etc. It is also recommended to carry out professional oral hygiene. It happens that the patient is indicated for the removal of several units in a row. This is necessary in order to free up additional space for the displacement of adjacent teeth.

After completing all the preparatory work, the specialist proceeds directly to the installation of the structure. Now the patient will have to visit the clinic once every 3 months for a preventive examination. After 1.5-3 years of treatment, wearing retainers or plates may be prescribed to consolidate the result.

previous post

Correcting crooked teeth without braces

next entry

The EXPERIENCE system line includes the following types of braces:

• metal self-ligating system EXPERIENCE metal
• metal self-ligating system EXPERIENCE metal, rhodium-coated braces
• metal self-ligating system EXPERIENCE mini metal
• metal self-ligating system EXPERIENCE mini metal, rhodium-plated brackets
• ceramic self-ligating system EXPERIENCE ceramic, rhodium-coated brackets

An important aesthetic benefit: Experience's fully rhodium-coated (Rh) aesthetic braces diffuse light and are non-glare due to the rhodium coating. In combination with aesthetic arches they are an ideal combination. This type of coating was implemented for the first time in orthodontic practice.

Duration of treatment

The length of time you can wear braces directly depends on the material used to make them: metal ones are installed for a period of six months or more, ceramic ones will have to be worn for at least a year. As a rule, self-ligating systems can reduce the duration of orthodontic treatment by 20-30%. But do not forget that after removing braces, a retention period begins - it is necessary to consolidate the results. Its duration is at least one period of wearing braces.

Metal braces Empower (USA) - RUR 80,000!

All inclusive! Preparation and treatment of the oral cavity, consultation with an orthodontic specialist, installation and adjustment of orthodontic structures. The price is for 1 jaw. Consultation with a doctor is free! Call now: +7 (495) 789-39-31

Lingual braces WIN –

Both WIN braces and Incognito braces are created by the same person - they were developed by orthodontist Dirk Wichmann. These are two very similar ligature systems, but by reducing the cost of some production stages, the WIN brace system costs patients less. For example, these braces are still made from 3D impressions of the teeth/jaws, but in this case only the “plates” of the brackets (which are in direct contact with the teeth) are custom-made.

Individually made “platforms” are then soldered with fasteners for ligatures and arches (the latter will no longer be individually made, but taken from standard kits). Also, in the manufacture of WIN, a regular cobalt-chrome alloy is used, and not a biocompatible alloy containing gold - like Incognito braces. In general, this is a really good analogue of Incognito braces, of good quality and at a more affordable price, but also with the same big disadvantage - poor maintainability.

Braces WIN (Germany) –

In the event of a breakdown, the orthodontist will have to order the broken element of the bracket system from Germany. Which, again, will be expensive, you will have to wait a long time and, accordingly, treatment may drag on for several more months.

Metal braces EXPERIENCE metal and EXPERIENCE mini metal

Why is it necessary to treat malocclusion?

It is imperative to combat malocclusion. If you don’t do this, you will be worried not only about an ugly smile, but also:

• problems in the gastrointestinal tract associated with inadequate chewing of food;
• violations in diction that cannot be eliminated even with the help of a speech therapist;
• deterioration of the condition and premature destruction of some teeth, due to the difficulty of maintaining hygiene in case of severe curvature of the dentition.

If you are planning to take care of your smile, make an appointment with our specialists. We will select devices for you that will help solve all your existing dental problems.