The widespread introduction of casting technology into the practice of dental laboratories has allowed foundry specialists to make thin-walled and high-precision solid-cast crowns from metals and medical alloys, designed to eliminate obvious defects in the dentition.
Such prosthetic devices are widely used in modern dental practice to restore the natural anatomical shape of damaged teeth or as supporting and fixing elements for prosthetic structures.
Why are all-metal crowns losing their relevance?
Article navigation
- What is the product
- In what cases are such crowns installed?
- Arguments for and against cast structures
- What are the types of cast products?
- What materials are these crowns made from?
- How structures are produced and installed
- Approximate prices
- How to care for cast dentures
- FAQ
Question for a specialist
In Soviet times, crowns made of ordinary metal looked familiar, and gold crowns were considered chic. Today, the idea of aesthetics has changed, dentistry has stepped far forward, and many modern clinics have completely abandoned this type of prosthetics. However, solid metal crowns are still installed in a number of cases - mainly as a budget option for dentition restoration.
Read about what these structures are made of, as well as their improved types, in today’s article.
Disadvantages of using solid crowns
The negative features of dental prosthetics using solid crowns include:
- the need to grind down a relatively large layer of surface tissue of the teeth;
- high thermal conductivity of prosthetic devices (if the pulp of the abutment tooth is close, the patient may experience severe discomfort);
- excessive abrasion of antagonist teeth during constant contact with the surface of a solid crown.
In addition, the disadvantage of such prosthetic devices is their appearance: the color of metal crowns does not match the color of natural tooth enamel. It is for this reason that they are used only for prosthetics of chewing teeth that are not noticeable when smiling and talking.
Otherwise, solid crowns fully perform their assigned tasks and are rightfully considered one of the best prosthetic devices designed to hide dentition defects.
What is the product
Solid dental crowns got their name based on their manufacturing technology - they are produced using a one-stage casting method in a mold. Models made from individual casts have the anatomical shape of the teeth of the future owner. In this way, it is possible to make both a single product and a bridge to replace several teeth - the technology allows you to do without soldering, which significantly saves time.
In what cases are such crowns installed?
Among the indications for installing solid crowns, experts in the field of dentistry and prosthetics identify the following clinical cases:
- the tooth is severely damaged - loss of dental tissue from 70%. In this case, filling does not make sense, since the pin with the light-polymer material simply will not hold,
- there are malocclusions, abnormalities in the location or shape of teeth,
- supports are needed to fix the bridge,
- pathological abrasion of enamel was diagnosed,
- the patient suffers from bruxism.
It should be noted that such structures can also be installed on the front teeth, but in this case the aesthetics of the smile will be seriously affected.
There are situations where solid, non-removable crowns can even harm the patient. Thus, among the contraindications to their installation are increased tooth sensitivity. The fact is that metal is a conductor of heat, so dental tissue will constantly experience temperature effects. As a result, inflammation of the pulp may develop.
Such designs are also not installed in patients who are allergic to metal. This is not a very common occurrence, but it should not be ignored. If a problem is identified, the dentist will suggest other options.
Increased wear of teeth on the opposite jaw is also a contraindication. Metal is much harder than dental tissue, so antagonistic elements will inevitably be subject to abrasion. If such a problem already exists, it will only get worse with the installation of cast products.
Don't know what type of prosthetics to choose?
We will help in the selection, advise where to read more information and compare types of prosthetics.
Consultation with an orthopedic doctor in Moscow clinics is free! Call now or request a call
Working hours: from 9:00 to 21:00 - seven days a week
Advantages and disadvantages
Such products have the following advantages:
- High quality and the ability to manufacture a design taking into account the individual characteristics of the patient’s jaw. Products are created individually for each tooth, they follow its shape and fit tightly to the gums.
- Durability and abrasion resistance. The structures are made from durable alloys that do not wear out for a long time; they are indicated for those who have pathological tooth wear. The products have a long service life.
- Possibility to do without deep preparation. Installation of solid cast structures involves grinding the teeth by only 0.8 mm.
The disadvantages of products of this type are the following qualities:
- lack of aesthetics,
- high thermal conductivity, which can cause discomfort when eating hot food or drinks.
Arguments for and against cast structures
In addition to the objective, today there is also a preconceived opinion about a solid-cast crown: that it is a product that has no advantages other than a low price. Of course this is not true. The main advantage of the design is durability: with proper installation and proper care, it can last more than 15 years. To present in detail the advantages of cast prostheses, let us compare them in a number of indicators with stamped ones (that is, created not individually, but from a template):
- tight fit: stamped structures are made from factory blanks, which are given an approximate shape using mechanical processing. It is impossible to install such a product tightly to the tooth surface - hence the ingress of food particles under the denture, the proliferation of bacteria, and the development of inflammatory processes. Cast products have high anatomical accuracy, so such problems are excluded,
- strength: the stamping is thin, therefore, under the influence of loads and chemical reactions in the oral cavity, it gradually collapses. After some time, a through hole is formed, opening access to infection. The result is the development of secondary caries, followed by pulpitis. The thickness of the solid crown is 0.3-0.5 mm. This is enough to successfully withstand both mechanical and chemical influences,
- safety: bridges from stamped elements are made by soldering. The connections are not very strong and often break - there is a high probability of injury. In addition, the products themselves and the solder have different compositions. This leads to the emergence of galvanic currents, which, in turn, cause irritation of the mucous membrane. Cast structures are made entirely from one alloy and do not require soldering, so such consequences do not occur.
Interesting! Stamped steel dental products are the oldest in their family. They were worn by many generations of Soviet citizens until the high toxicity of the composition, to which cadmium, beryllium, lead and other impurities harmful to health were added, was discovered. Nowadays such structures are made from a safer alloy, but in general stamping is carried out only in the deep provinces. Similar products have not been produced in any country except Russia for about 100 years.
Thanks to these properties of solid-cast crowns, both clasp and bridge systems using them will be more reliable. Surprisingly, cast metal prostheses have a number of advantages over metal-ceramic products that are popular today. The design is simpler, so it can be manufactured faster. In addition, cast metal is not at risk of chipping, as is the case with a ceramic coating. This product is also thinner than metal-ceramic, therefore, it requires less grinding of the teeth - as a result, they remain more viable.
The main disadvantage of metal prostheses is the lack of aesthetics, which today has acquired special importance. Therefore, such structures are placed only on chewing teeth, which are not very visible to others. But as soon as you laugh heartily, the alien metal will become noticeable.
“I’m 60 years old, and now I need to get my teeth done. Previously, I remember, there was no choice, but now there is nothing on offer. At first I wanted to install metal ones from casting - it doesn’t seem to be visible on the molars. Then I thought: I work as a teacher at school, constantly in public, I would still be embarrassed to talk and smile. I chose metal ceramics and I don’t regret it, I feel absolutely free.”
Vera Sergeevna, patient of one of the Moscow dental centers
Complex on 4 OSSTEM implants with delayed loading - from RUB 170,000.
Complex implantation Osstem (South Korea) with delayed loading after 4-6 months.
Guarantee for the doctor’s work - unlimited Call now or order a call
Opening hours: 24 hours a day - seven days a week
There are also more significant disadvantages. This is both a risk of developing allergies and a danger of damaging neighboring teeth, as well as those located on the opposite jaw - due to the high hardness of the metal. Therefore, if you are not too tight on funds, you should still consider more advanced prosthetic options. In particular, you can also choose a solid metal structure, but with ceramic lining (this will be discussed below).
Features of installing solid crowns
To ensure that crowns do not create problems and serve properly for a long time, CELT dentists strictly follow all stages of their installation.
Preparatory activities
Most often, the installation procedure is painless, since the crown is placed on a tooth with a previously removed nerve. In progress:
- Expand and seal the canals;
- Treat caries or pulpitis (if identified);
- The unit is additionally strengthened (if it is severely damaged);
- Turning is carried out.
Installation and fixation of the prosthesis
At this stage, the dentist takes an impression, which is sent to the dental laboratory. When the crown is ready, he:
- He tries it on and checks the tightness of the fit; if necessary, he carries out preparation;
- Performs temporary restraints to test unit responses and patient comfort;
- Secures the crown permanently using dental cement.
You can make an appointment with CELT orthopedists online on our website or by contacting our information line operators: +7.
Make an appointment through the application or by calling +7 +7 We work every day:
- Monday—Friday: 8.00—20.00
- Saturday: 8.00–18.00
- Sunday is a day off
The nearest metro and MCC stations to the clinic:
- Highway of Enthusiasts or Perovo
- Partisan
- Enthusiast Highway
Driving directions
What are the types of cast products?
Modern dentistry has significantly expanded the arsenal of metal casting products. Today the patient can choose designs:
- without spraying: they have a regular metal surface, polished to a shine. Aesthetics are reduced to zero,
- with spraying: to give a white color or a “gold” tint, the solid crown is treated with a special composition using vacuum plasma equipment,
- with partial cladding: ceramic or plastic linings are fixed to the front parts of the products. The teeth look natural, while the design will cost less than classic metal-ceramics,
- with full cladding: this option can no longer be called a product made only of metal. These are rather combined metal-ceramic crowns. Such designs are superior to all others in aesthetics and retain strength due to their metal base.
Spraying options are not suitable for everyone: compositions that are applied to the surface can irritate the oral mucosa. Therefore, to achieve aesthetics on a limited budget, it is still better to choose designs with front cladding, although they also have a drawback - cracks and chips often appear on the linings.
What materials are these crowns made from?
In the production of the structures under consideration, the following types of materials are mainly used:
- chromium-based alloys with the addition of nickel or cobalt: these are the most common materials characterized by increased strength - prostheses made from them are called carbide. They have the most affordable price, suitable for low-income people,
On a note! Today, one crown without coating will cost about 4 thousand rubles, with titanium nitride coating - about 5 thousand rubles. Ceramic cladding will increase the cost of the product to at least 7 thousand rubles. Treatment of identified pathologies, the work of a doctor, as well as the manufacture and installation of a temporary crown are paid separately.
- alloys of precious metals: solid gold dental crowns have a big advantage - they are biocompatible with the human body, and therefore do not cause allergic reactions. In its pure form, gold is not suitable for orthopedic purposes: it is too soft. Its alloys are used with copper, silver, palladium and even platinum. These compositions do not differ in color from pure metal, so this option in our time is only suitable for eccentric people. And the price is not affordable for everyone,
- alloys with titanium: structures lead in strength - it is 9-10 times higher than that of other products. Like gold, titanium is biologically compatible with natural tissues and does not have a harmful effect on the roots and adjacent teeth. However, such materials are extremely capricious, and the manufacturing process is labor-intensive. In addition, alloys have low adhesion to ceramics, so it will be difficult to create an aesthetic veneer.
It is better to entrust the choice of material for a crown to a specialist. The doctor will take into account all the features and nuances of the clinical picture, on the basis of which he can offer the most suitable option.
How structures are produced and installed
The creation and fixation of products is a standard dental procedure. Thus, the following clinical and laboratory stages of manufacturing solid crowns are distinguished:
- preparatory: through examination and examination, the doctor identifies existing diseases. If necessary, the tooth is treated and strengthened. Then it is prepared for a solid crown using a suitable method: using ultrasound or laser, tunnel or air-abrasive technology. After this, impressions are taken,
- modeling of a solid-cast crown: two models are made - a working one (of the dentition where the prosthesis will stand) and an auxiliary one (simulating the opposite row). Then they create a model - for this they use wax and plaster,
- product manufacturing: the process takes place in the laboratory. When the structure has already been cast, the specialist evaluates the quality of its execution and, at the request of the patient, covers it with ceramics. Then a fitting is carried out on a plaster copy of the patient’s tooth. If necessary, the product is adjusted.
Installation of a solid-cast crown is also performed in several stages. First, it is tried on the prepared tooth. If inaccuracies are identified, the design is returned for revision. Sometimes the product is temporarily fixed in the patient's mouth to determine whether there is any discomfort when chewing or an allergy to the alloy. If everything is in order, the prosthesis is secured with medical cement.
Clinical and laboratory stages of production of stamped crowns - presentation
Clinical and laboratory stages of manufacturing stamped crowns Oleg Isaikin 2nd group, 3rd year 12/13 Moscow, 2013 GBOU VPO First Moscow State Medical University named after. I. M. Sechenova Faculty of Dentistry Department of Orthopedic Dentistry
The first clinical stage is preparing teeth and taking impressions. Preparation of a tooth for a full metal stamped crown involves grinding all five surfaces. The occlusal surface or cutting edge is ground to the thickness of the future crown (0.25 mm). The chewing surface is prepared without significantly disturbing the surface topography, cutting off the tubercles and simultaneously deepening the grooves. The contours of the mesial and distal corners of the incisal edge of the anterior teeth are preserved. Sharp angles that are formed after separation between the buccal and proximal surfaces are smoothed by shaped heads. As a result of preparation, the perimeter of the tooth in the neck area should be equal to the perimeter of the chewing surface or cutting edge while maintaining the anatomical shape of the occlusal surface or cutting edge. Control of the amount of hard tissue that is removed is carried out using carbon paper composed of 16 layers. This approximately corresponds to the thickness of the crown - 0.25-0.3 mm 1
The first clinical stage is preparing the teeth and taking impressions. After preparing the tooth for a stamped crown, it is necessary to obtain an impression that gives an exact impression of the prepared tooth. Impressions are taken from both jaws. This allows the technician to fix the plaster models prepared after impressions in the articulator and easily navigate the relationship of the prepared tooth with its antagonists. An impression of the entire dentition allows the technician to evaluate the shape of the dentition, the position of each tooth on the alveolar process, and easily install models in the position of central occlusion. In addition, the technician can facilitate the modeling of an artificial crown, especially if the prosthetic tooth is significantly damaged. Partial impressions are not suitable for this purpose. 1
The first laboratory stage is the production of a plaster model. After the impressions of the upper and lower jaws obtained in the clinic, plaster models are cast, which the dental technician composes in the position of central occlusion and fixes in the articulator or occluder, checking the degree of separation of the prepared tooth from the antagonists. 1
The second laboratory stage is the production of a stamped metal crown. Restoration of the anatomical shape of the tooth (modeling) is carried out by gradually layering molten modeling wax on all surfaces of the stump of a plaster tooth. To obtain the first layer, boiling wax is poured onto the stump of a plaster tooth. The plaster model is held with the base up, and the tip of a spatula with boiling wax is applied at a slight angle to the surface of the tooth from the neck to the cutting edge or chewing surface. This prevents melted wax from getting into the neck area and maintains the accuracy of its contours. Then, by layering the molten wax on the surface of the plaster tooth, we achieve an increase in volume necessary to restore the anatomical shape. The chewing surface is modeled behind the antagonist teeth. The modeled tooth should be smaller than the future crown by the thickness of the metal (0.25-0.3 mm).
The second laboratory stage is the production of a stamped metal crown. After resuming the anatomical shape with wax, they begin to produce a plaster stamp and replace it with a stamp made of a low-melting alloy. To do this, the modeled tooth is cut out of the plaster model using a jigsaw or a plaster knife so that the surfaces of the so-called root part of the plaster die are parallel to the longitudinal axis of the tooth. Then, at a distance of 1 mm from the line of the clinical neck of the tooth and parallel to it, a groove 0.5 mm deep is made. This groove serves as a guide to determine the length of the edge of the metal crown. Metal stamps are prepared using plaster stamps. To do this, the cut-out plaster stamp is immersed in water for 5-10 minutes, after which the plaster is mixed, poured into a rubber ring with a diameter of 3-4 cm and a height of 4-5 cm (if there is 1 crown) - immersed strictly vertically and exactly in the center of the rubber ring ; Place the plaster in an even layer on the table or pour it into special frames (molds) (if there are several crowns) and with the proximal surface the plaster stamp is exactly half-immersed in it.
The second laboratory stage is the production of a stamped metal crown. The hardened gypsum block is pushed out of the rubber ring. Wedge-shaped longitudinal grooves are made on two opposite sides, oriented towards the plaster stamp so that the fracture line passes strictly through its middle. After releasing the gypsum stamp, all parts of the gypsum countermold are assembled, placed in a rubber ring and filled with molten low-melting alloy, which is melted in a special spoon. To make one artificial crown, two metal dies are cast. The first, as the most accurate, is used for final stamping, and the second, less accurate, due to the loss of pieces of the plaster countermold when it is re-formed, is used for the previous stamping. The loss of pieces of the gypsum counterform when composing its parts leads to the formation of irregularities on the surface of the metal 2 stamp, which are removed with a file. In accordance with the diameter of the crown of the metal stamp, a metal sleeve is selected. For this purpose, a special device for prosthetic sleeves is used (Samson device).
The second laboratory stage is the production of a stamped metal crown. To accurately recreate the chewing surface or cutting edge of a metal tooth in a socket, a separate technique can be recommended. The crown part of the metal tooth is wrapped with one layer of adhesive plaster, leaving the occlusal surface free. A molten low-melting alloy is poured into a metal cuvette 1.5 cm high and 3 cm in diameter with a catheter-like recess and a metal stamp is lowered into it with the chewing surface down to a depth of 1-2 mm. After approval of the metal, the tooth is easily removed, and the resulting image of the chewing surface is used for preliminary stamping occlusal surface of the crown. To do this, after removing the adhesive plaster from the stamp, a pre-stamped sleeve is hammered onto it and a low-melting metal plate is hammered into the recess with the blows of a hammer. Using a hammer, the sleeve is given the approximate shape of the future crown, achieving a tighter fit to the entire surface of the metal stamp. This ends the preliminary stamping of the crown, which is performed on the second stamp. Before final stamping, the sleeve is again subjected to heat treatment in the same mode, and the first stamp is prepared for final stamping by an external or combined method. 2
The second clinical stage is the fitting of crowns. A correctly made and fitted crown tightly covers the neck of the tooth and it is often difficult to remove it from the tooth. Then they take a little cotton wool, cover the crown with it, grab the crown with one or two, and the molar with three fingers and with careful movements try to move the crown alternately in the vestibulo-oral direction. If the crown cannot be removed using this technique, it is removed using tools. To do this, use a spatula for mixing cement or a dental spatula. It is more convenient to use a special Kopp crown puller.
The third clinical stage is fixation of the crown in the oral cavity. The stamped metal crown, tested in the patient’s oral cavity, is again transferred to the dental laboratory for polishing. Before applying it to the oral cavity, it is thoroughly washed with hydrogen peroxide and disinfected with alcohol. The abutment tooth is covered with cotton swabs and treated with medication. 2 The tooth surface is thoroughly disinfected with alcohol and dried with ether. Better results can be achieved by drying with warm air, which is supplied through a special drill tip. Fixing cement of a liquid consistency is mixed on a pre-prepared sterile glass plate (lash). The rules for preparing cement and its consistency depend on the brand and the goal that needs to be achieved when strengthening the crown. The prepared cement is introduced into the crown with a clinical spatula, filling it approximately one-third. The inner walls are coated to the edges of the crown. The crown with cement is placed on the tooth, making sure that the cotton swabs do not get under the edge of the crown. To do this, it is useful to fix them with the fingers of your left hand at a certain distance from the neck of the tooth, and put on the stamped crown with your right hand.
The third clinical stage is fixation of the crown in the oral cavity. After applying the crown with cement, it is necessary to immediately check the occlusal relationship according to the central occlusion. If the crown is in close contact with opposing teeth, patients are asked to hold the teeth together for a few minutes until the cement hardens. The remaining cement is carefully removed from the surface of the crown and adjacent teeth. 2 Particular care must be taken to remove the cement that fills the interdental spaces. Remains of cement on the surface of the polished crown can be easily removed with a cotton swab soaked in cement phosphate liquid. After removing cement residues from the surface of the tooth, the patient is recommended to keep the teeth closed for another 1-2 hours until the fixing material completely hardens.
Approximate prices
The cost of prosthetics consists of several factors, including: an x-ray image - 1000 rubles, fixation of a temporary structure until the permanent one is ready - 2000 rubles, the cast crown itself - 6000 rubles. Of course, these are approximate prices that may vary depending on the level of prestige of the clinic and region of residence. Also, the selected type of metal has a direct impact on the formation of the cost of the product - gold structures are considered the most expensive, their price starts from 15-20 thousand rubles.
Only until 15.01 South Korean implant Osstem - from 18,500 rubles.
Hurry up to sign up for a free consultation and lock in promotional prices.
Call now or request a call
Opening hours: 24 hours a day - seven days a week
