From this article you will learn:
- what is Emax – reviews, before and after photos,
- its comparison with zirconium dioxide,
- Emax crowns and veneers – price 2022.
Metal-free ceramics E-max is the best option for dental prosthetics with crowns, veneers, and bridges up to 3 units in length. This material provides excellent aesthetics, and if you want artificial dental crowns or veneers to blend in as closely as possible with adjacent teeth in color and translucency, Emax material is a good choice. It is produced for dentistry (Liechtenstein).
Emax ceramics consists of 70% lithium disilicate crystals, which allows this material to be classified as glass ceramics. Thanks to the optical parameters of the glass matrix, this material has increased light transmittance, which makes its optical properties as similar as possible to the enamel of real teeth. Therefore, reviews of E-max ceramic crowns or veneers made from this material are good even among the most aesthetically demanding patients.
Appearance and transparency of E-max –
In this article we will discuss both the advantages and disadvantages of E-max ceramics, which make its use undesirable in a number of clinical situations. We will also compare E-max veneers and ceramic crowns with other types of metal-free ceramics (for example, zirconium dioxide or feldspathic ceramics) so that you can understand which denture ceramics will be best in your case.
Features of E-Max veneers
E-Max from the German company Ivoclar Vivadent is an innovative system for single glass-ceramic restorations based on lithium disilicate. E-Max veneers are characterized by high strength (about 500 MPa), durability and aesthetics. To best match the natural appearance of teeth, a system for determining and selecting color was developed - dentists have all possible options in their arsenal. In this case, the doctor can adjust not only the color, but also the transparency of the lining, bringing it as close as possible to natural enamel. Thus, E-Max veneers are completely indistinguishable in the dentition, only a professional will notice them.
E-Max technology allows you to create a plate per tooth with a thickness of only 0.3 millimeters. Due to its high strength, the installation of such veneers will require minimal preparation, and in some cases will allow you to not grind down the tooth at all.
Center warranty - 25 years
TsPS "Doctor Levin" is the only clinic in Moscow that provides a quarter-century guarantee on the integrity and color stability of E-Max ceramic veneers.
This is not a ploy to attract patients, but a caring attitude towards the work for which we are responsible.
Veneers are manufactured in our Center’s own digital dental laboratory, which allows us to eliminate the human factor and control every stage of production. Direct purchases of E-max lithium disilicate blocks from the manufacturer eliminate the cheap Chinese counterfeits that are so often found in Moscow dentistry.
Let's do veneers once and for all !
To obtain an ideal result, we organized the interaction of all departments of the Center in accordance with the Unified Quality Standards. The transition to 3D technology eliminated the slightest inaccuracies in the planning and production of each veneer. And the professional qualities of our doctors guarantee pinpoint accuracy of installation.
Levin Dmitry Valerievich Chief physician and founder of the Doctor Levin center
When should you consider getting E-Max veneers?
IPS E-Max veneers can be installed on both front and chewing teeth - due to their high strength, they can withstand heavy loads. In general, the indications for installing E-Max ceramic veneers are as follows:
- thinning or damage to the enamel;
- discolored or tetracycline teeth;
- fluorosis, in which there are spots on the enamel;
- significant gaps between teeth;
- short or small teeth;
- slight crooked teeth.
Dental microscope - for gentle work
The use of Seiler optics helps achieve the highest accuracy and ensures long service life
- Delicate tooth preparation with maximum preservation of healthy tissue
- Preventing cement from flowing into interdental spaces during installation
- Control of tightness during fixation
E-Max veneer manufacturing technologies
E-Max Press veneers are considered an advanced method for creating restorations. The technology itself is characterized by the following advantages:
- wide range of indications for use;
- aesthetics of natural teeth;
- minimally invasive installation;
- precise edge fit;
- high structural strength.
There are several technologies for making E-Max veneers from lithium disilicate ceramics. This material is suitable for both pressing technology and production using CAD/CAM computer modeling. Both technologies have their merits.
IPS Empress System | IPS Empress CAD System |
TechnologyThe IPS Empress technology is based on the pressing process. Strength in megapascalsThe strength of the structures is 470 MPa. | TechnologyIPS Empress CAD technology is based on the crystallization process. Strength in megapascalsThe strength of the structures is 530 MPa. |
Whatever technology the clinic uses, where you decide to install E-Max veneers, it will be a high-quality dental restoration.
Facebow and articulator - to take into account the bite
An integral component in the production of comfortable veneers, taking into account the individual bite
- Identification of occlusion pathologies for correction before prosthetics
- Taking into account the jaw ratio when making veneers
- Prevention of TMJ dysfunctions after prosthetics
Veneer installation using E-Max technology
E-Max veneers are placed in the same way as other veneers, in several stages. This usually takes from one to two weeks, but there are dentists that can do everything in one day. The installation of veneers using IPS Empress and IPS Empress CAD technologies is no different.
Stage 1
First, the doctor grinds down the teeth on which veneers will be installed. In some cases, this step is skipped when preparation can be avoided. Then the color of the future veneer is selected; the E-Max system has all possible options.
Stage 2
After this, the doctor receives an optical impression, which is then transferred to the laboratory, where the veneer is made using one technology or another. While this process lasts, temporary onlays are fixed to the patient’s ground teeth.
Stage 3
The installation of permanent structures does not take much time; the doctor attaches them using a special compound using a certain technology, and finally grinds and polishes them.
Computer diagnostics - to eliminate risks
The study is carried out using a high-precision 3D tomograph Sirona Galileos in order to identify and prevent possible risks
- Assessment of dental condition at the preparation stage
- Identification of hidden foci of inflammation in bone tissue
- Analysis of the nasal sinuses when installed on the upper jaw
Crown or veneer E-Max?
The choice between crowns or E-Max veneers can only be based on indications. In some cases, overlays simply cannot be installed. If the tooth is excessively damaged, the doctor will suggest installing a crown. The veneer is placed only on the front side of the tooth and is responsible for the aesthetic appearance, and not for functionality. The next reason for refusing veneers may be depulpation. If the nerve of a tooth is removed, the dentist will likely choose to place a crown. There are also a number of contraindications to installing veneers in principle:
- caries;
- bruxism (the habit of grinding teeth);
- malocclusion;
- gum diseases.
In all these cases, veneers will not perform their intended functions; it is worth resorting to other dental developments and undergoing the necessary treatment.
Review of clinics where you can get E.Max veneers
As noted earlier, processing the material requires special equipment that is installed in the laboratory. Therefore, not all clinics offer such a solution for restoring the smile area. We present a list of Moscow dentists where you are guaranteed to be able to receive such a service.
Name | Addresses | Price | |
1 | Dentistry Smile-at-Once. Has its own dental laboratory | a network of dentistry, which has two addresses: st. Stanislavskogo, 11 (metro Taganskaya) and Dmitrovskoye highway, 5/1 (metro Dmitrovskaya) | 30,000 rubles |
2 | Clinic "Aesthetic Dent" | st. Fadeeva (metro Novoslabodskaya) | 36,500 rubles |
3 | Dentistry "SLklinik" | dental network: st. Milashenkova, 22 (metro Timiryazevskaya), st. Klyazmenskaya, 11 (metro station Rechnoy Vokzal), st. Seleznevskaya, 34/3 (metro station Dostoevskaya), Altufevskoye sh., 85 (metro station Altufyevo) | 27,990 rubles |
4 | Dentistry "All Yours" | network of dentists (more than 20 branches in Moscow) | 21,200 rubles |
Important! When choosing a clinic, check whether pressed ceramic veneers are actually offered to you - certificates and licenses are needed. Dentistry often announces a promotion, but behaves in bad faith and offers the patient a cheaper alternative. This is mainly true if you see a price for this service that is too low.
Reviews
Every person wants to have a flawless and healthy smile. Veneers are about aesthetics and preserving the functions of the restored units. But how effective are they and how long will they last?
Patients who have already tested this restoration method on themselves share their impressions. Many of them were pleased with the changes.
Some people complain that it takes a long time to get used to new teeth. In general, reviews of the use of E-MAX technology are positive.
You can also share your impressions of the restoration in the comments to this article.
If you find an error, please select a piece of text and press Ctrl+Enter.
Tags veneers fixed dentures
Did you like the article? stay tuned
Previous article
Rating of dental implant manufacturers according to experts and patients
Next article
Polyurethane dentures are an ideal budget solution to the problem
Indications
Like any prosthetics, the use of onlays has certain indications and limitations for their installation.
Dental plates made in Germany allow you to get rid of the following disadvantages:
- changes in the color of the enamel associated with certain diseases, taking medications, smoking, excessive consumption of coloring drinks (coffee, tea) that cause spotting or yellowing;
- darkening of old fillings;
- presence of defects in the form of cracks, chips;
- incorrect orientation of the incisors (rotation around an axis, slight crowding);
- thinning and erosion of enamel;
- the presence of interdental gaps (diastema, trema);
- violation of the shape and position of the incisors due to malocclusion;
- in the absence of effect after other restoration techniques.
Features of the manufacture of Cerec veneers and the technique of their installation.
Let's talk here about the pros and cons of solid metal-ceramic crowns.
At this address https://www.vash-dentist.ru/protezirovanie/nesemnyie-p/koronki-np/zolotyie.html we will tell you in which case it is justified to install a gold crown on a tooth.
Life time
The service life of ceramic linings with proper care is up to 10 years. But, products may fail earlier in the following cases:
- If the cement under the structure fails. Then the plate may fall out. The veneer must be taken to a dentist, who will professionally reattach it.
- If a hard object hits the elements of the dentition while eating, biting nuts, or uncorking bottles with your teeth, the lining may crack.
Rules of care
If you follow the manufacturer's recommendations, the average service life of a ceramic veneer is 10 years. The patient is not required to radically change his lifestyle; it is enough to follow a number of rules:
- Carry out regular oral hygiene twice a day, use dental floss and mouthwash;
- come for a preventive examination to the dentist twice a year to prevent the development of caries and tooth decay;
- do not eat hard and viscous foods (seeds, nuts, toffee, sticky caramel).