Dental aligners for teeth straightening – transparent, effective, comfortable!

Quick bite correction with an invisible orthodontic system.

Correcting teeth with mouth guards is an alternative to braces. The thinnest onlays are made of transparent bioplastic, invisible on the teeth. The caps fit tightly around each tooth, carefully moving pathologically located units into an even smile line. Transparent mouth guards for straightening teeth easily eliminate minor malocclusions and are used as retainers to be worn after removal of orthodontic appliances.

Invisible aligners for teeth straightening: product description

Dental mouth guards are a removable orthodontic structure made of a transparent polymer composition. The second name of the products is aligners. The technology is new, it has been used for just over 15 years, but the achieved treatment results are impressive.

Plastic mouth guards for straightening teeth, like braces, exert targeted physical pressure on incisors, canines, molars and premolars, carefully correcting the dentition. Mouthguards for straightening teeth are given to the patient in a set of 5-30 pieces. Each new aligner placed is a small step towards an ideal bite and smile.

Material and layering

Most mouthguards are made from either thermoplastic POE, silicone, or latex. All these materials are safe for health and widely applicable in martial arts.

Hot melt trays can be molded when exposed to temperature. This allows you to adjust the mouthguard to the individual bite of the athlete. This is necessary for better protection; the mouth guard fits tightly to the teeth in accordance with the individual bite. To obtain this result, the mouth guard must be pre-fitted; read our material on how to weld a mouth guard.

Mouthguards that cannot be cooked (usually silicone) are used without prior preparation. One of the peculiarities is that they can fall off the upper jaw, causing some discomfort.

Multilayer

Modern mouth guards come in both classic ones, made of single-component material, and multi-layer ones.

Multilayer mouthguards are made from several types of thermoplastics, varying in density and softness. Each layer here performs its own task.

For example, a mouthguard of the Zelart 3535 brand has two layers: an internal one, made of soft plastic (gel), which makes it easier to ensure a better fit and form the correct bite, and an external, more rigid plastic, which provides the frame and shape of the product.

Mouth guards for teeth correction: types and options

The orthodontist will recommend which mouth guards to install. The selection of products is presented in a variety of categories.

Preparation method

Materials

Wearing time

Patient age

Diamondbrite thermoplastic mouth guards

Diamondbrite Thermoplastic Mouthguards

Diamondbrite thermoplastic silicone trays are used at home for teeth whitening and remineralizing procedures. The principle of their operation is based on their ability to become soft when heated, and to retain their shape when cooled. In this way, by heating the trays and applying them tightly to the teeth, you can obtain a shape that will accurately follow the relief of the dentition. Having received an impression of the teeth, various procedures can be carried out with great efficiency using special means, ensuring close contact with the surface of the teeth.

Mode of application

Fill a small container (300-500 ml.) with hot (70-80 C°) water; Dip one mouthguard blank into water for 15-20 seconds. The workpiece will soften; Remove the workpiece from the water and, making sure that it is not very hot, place it on the upper row of teeth; Press the blank tightly onto the teeth from the outside and inside with your fingers to give the shape of the dentition; Remove the tray and rinse under running cold water to fix its shape (harden); Try on the mouthguard and make sure it fits snugly to your teeth. If necessary, cut off unnecessary sections of the edges of the mouthguard with scissors; Repeat all steps to make a lower jaw guard.

Having thus obtained mouthguards that perfectly replicate the surface of the dentition, you can proceed directly to the necessary procedure. The required amount of product is evenly applied to the inner surfaces of the trays, and the trays are placed on the teeth, ensuring full contact of the active substance with the surface of the teeth. The duration and frequency of procedures is determined depending on the requirements of the drug used.

Diamondbrite is a trademark of products of one of the leaders in the production of dental products - the American company Confi-Dental . All of the company's products are made from high quality materials and meet all international safety requirements.

Hello everyone who stopped by! The topic of teeth whitening has become the most pressing for me in recent years; during this time I have tried a bunch of methods: whitening strips, special home kits with a lamp, remineralizing gel from ROCS, as well as whitening pastes, but have not yet made it to the office. dentist

Actually, such silicone trays always come in whitening kits in the amount of 2 pieces, they can be found in a pharmacy, but the price for 2 pieces is about 200 rubles , on Aliexpress 40 and a penny rubles for 2 pieces . And this is not a matter of bad plastic, etc., the material is exactly the same.

My detailed review of Aliexpress: coupons, Brazilian purchases, buyer ratings, points and much more, and photo BRAGs, of course

Delivery took 4 weeks, the mouthguards came in a zip bag, there was no smell, but before use I washed them thoroughly with Cold Chlorhexidine. Under no circumstances treat the mouth guards with boiling water or even slightly hot/warm water, the mouth guards will become deformed!

Link to thermoplastic mouthguards

Generally speaking, there are 2 types of dental guards : Conventional and thermoplastic . The latter differ in that they can be “customized” Ideally to your teeth , then the whitening process will be effective.

Teeth whitening trays are probably the most inexpensive method of whitening, not counting toothpastes.

How to make a mouth guard for your teeth?

We take an already cleaned mouth guard (I wrote about this above) and a glass of hot water. We lower our mouthguard literally for 5-10 seconds in water, take it out and insert it into the oral cavity, put it on the teeth, bite it and get a ready-made mouthguard for you. You need to make 2 trays in this way: on the top and bottom row.

That's it. Now apply the whitening gel to the teeth or mouth guard and insert it onto the teeth, wait for the allotted time and rinse your mouth.

I want to say that the main thing is not to overdo it with the time you hold the mouth guard in hot water . I ruined the first mouth guard in this way, it turned into a mini version of the mouth guard, shrank, and could not be returned to its original position.

It's better to under-than over- - this law works here.

Caring for a teeth whitening tray

After each use, the mouthguard should be thoroughly rinsed in cold water, removing all the product from the surface. I also don’t hesitate to wipe them with chlorhexidine once again. It is better to store it in a bag or box and not in the open scorching sun.

I change my teeth whitening tray every 3-6 months (I use it 1-2 times a week).

Conclusion: I recommend, recommend and once again recommend for purchase! Aliexpress mouth guards are no worse in quality than mouth guards from expensive sets, as well as regular mouth guards that I bought at the pharmacy, but the savings are obvious in your wallet. I will continue to order from here.

also recommend using these products whiten and strengthen

Thank you for your attention! Wishing you strong and healthy teeth.

Diamondbrite thermoplastic trays for whitening and remineralizing gels - description

Diamondbrite thermoplastic silicone trays for home use of whitening and remineralizing gels. Many remineralizing gels or fluoridating gels require the use of special custom trays for maximum effectiveness. Such mouthguards not only increase the benefits of the remineralization procedure, but also make the procedure more comfortable, and also contribute to significant savings in gels.

Many at-home teeth whitening kits may also not include thermoplastic trays for at-home use.

You can order individual silicone mouth guards from your dentist, but the disadvantages of this approach are obvious: not every clinic has vacuum forming machines for making mouth guards, and where such a machine is available, the service for making mouth guards can cost from 3,000 rubles and more.

Why overpay and waste time if you can make exactly the same mouth guards yourself at home in just a couple of minutes? Using the kit, you can make your own silicone aligners that will fit perfectly on your teeth! The set includes two blanks for making aligners (for the upper and lower jaws), a stylish case for storing ready-made aligners.

Instructions for making custom Diamondbrite silicone aligners

Fill a glass with hot (but not boiling!) water at a temperature of 70-80 C°. Holding the mouthguard blank by the handle, lower it into the water for 30 seconds. Take out the workpiece, make sure it is not very hot. Place the blank on the top row of teeth. Crimp the blank onto your teeth from the outside and inside with your fingers so that it takes the shape of the jaw. Rinse the finished mouthguard under running cold water to fix its shape. Place the mouthguard on your teeth, making sure that it fits evenly and tightly enough to the dentition. If you did everything correctly, the mouthguard will stay on your teeth without falling off or interfering with your speech. If the mouthguard does not hold well, it can be reheated in water and the shape adjusted. Cut off the handle mentioned in step 2. Repeat the procedure for making a mouth guard for the lower jaw.

Country of origin: China

There are 3 types of trays used for whitening:

Standard. Such products are produced in whole series. They are sold in pharmacies and some online stores. This is the cheapest type of whitening trays. The full course will cost only 2-3 thousand rubles. The disadvantage of this method is the lack of an individual approach, which can cause discomfort while wearing the product. The standard set includes 10 pairs for both jaws. All mouthguards are double-layered, with the inside filled with a special gel. The product must be worn for an hour. Thermoplastic. For the manufacture of such mouth guards, materials are used that can soften by heating. Thanks to this, there is no discomfort while wearing the product. The design is dipped into almost boiling water and then put on the teeth. The price of the kit ranges from 4.5-6 thousand rubles. To apply the whitening gel, use the syringe included in the kit. You need to wear a mouth guard for 8 hours at night and 3-5 hours during the day.

When purchasing a standard or thermoplastic mouthguard, the Client receives a whitening gel , the active ingredient of which is hydrogen peroxide. It also contains fluorine and potassium nitrate, which help reduce enamel sensitivity.

The gel for filling individual trays is prepared by the dentist. The doctor uses the desired concentration of hydrogen peroxide and then adds substances that reduce tooth sensitivity. The amount of finished paste is designed for 2 weeks.

If there is significant yellowing of the enamel, dentists recommend using a whitening gel with a high concentration of carbamide peroxide, as well as a composition aimed at remineralizing the enamel. The latter substance is worn on the surface of the teeth after the tray is removed.

Contraindications to whitening with trays

In order not to harm the health of your teeth and gums, you should familiarize yourself with the contraindications to whitening:

Product use

Today, anyone can buy a mouth guard, because you don’t need a prescription. Some people purchase a whitening product without first consulting a dentist. This should not be done, since the whitening gel contains potent substances that, if used incorrectly, can damage tooth enamel , as well as injure the mucous membrane and cause inflammation of the gums.

To avoid possible consequences, you must adhere to the following recommendations:

When choosing a whitening gel, you should pay attention to the concentration of hydrogen peroxide. If there is a lot of it, then the mouth guard can be worn for 1-3 hours. Products with a minimal amount of peroxide are allowed to be worn at night; you must follow all the recommendations written in the instructions; Whitening should be done after professional stone removal; Before using the mouthguard, it is recommended to brush your teeth with toothpaste.

How to maintain the results of whitening?

To keep your teeth white, you should stick to a “white” diet for several days. In other words, your diet should not contain the following foods:

red wine and fruit drinks; tea and coffee; chocolate; sparkling water, which contains dyes; beets, carrots and other coloring vegetables, berries and fruits; soy sauce, adjika and ketchup.

If you unknowingly eat something from the above list, be sure to brush your teeth.

It is not recommended to smoke cigarettes for 2 weeks after the end of whitening. If you are unable to quit smoking even for 3-4 days, then it is better not to whiten your teeth, because the effect will not last long.

It is very important to maintain good hygiene. So, you need to brush your teeth at least in the morning and evening, and also use dental floss regularly.

By mouthguards we mean removable structures, which are special linings on the surface of the teeth.

Mouthguards can be used for any type of dental treatment, prevention, as well as to protect teeth from damage in traumatic sports.

Mouthguards are divided into 3 types: standard, thermoplastic and individual.

Standard mouthguards are immediately ready for use, but their disadvantage is the uniformity of shapes and sizes. Individual mouthguards are made from biopolymers in special laboratories using exact casts of the jaws of a particular patient according to the individual characteristics of the structure of the person’s dentition.

Thermoplastic mouth guards are a convenient, fast and almost perfectly fitting option for mouth guards. Thermoplastic trays are an indispensable accessory for home teeth whitening procedures and remineralization of tooth enamel using calcium or fluoride-based gels.

The mouthguards of the popular Diamondbrite brand are made from the best raw materials at the high-tech production of the American company Confi-Dental, a leader in the dental materials market.

Recommendations

Diamondbrite mouth guards do not require special care, but should be brushed regularly with a toothbrush in cool water and not exposed to high temperatures to maintain the shape of the mouth guard. Dentists recommend that while using a mouthguard, you should inspect it for abrasions or damage, and carry the mouthguards only in a specially designed hard container with good ventilation.

Instructions for use

For each jaw, mouth guards are made separately, sequentially. Using the handle, the mouth guard blank must be lowered into hot, but not boiling, water for 30 seconds. After this, the workpiece needs to be cooled a little and placed on the selected row of teeth (upper or lower), press the workpiece with your fingers from the outside and inside so that it takes the shape of the jaw. To fix the shape, the mouthguard should be rinsed with cold water. If the mouth guard is made correctly, it will not fall off and interfere with conversation, otherwise the shape of the mouth guard can be adjusted by repeatedly immersing it in hot water. Having made the mouthguard, the handle of the workpiece can be cut off.

Instructions for use Zubi5.ru Read more…

Ultralight aligners - American aligners for teeth straightening

Straightening teeth with Ultralight aligners is a simple way to correct your bite. Suitable for adults and children. Teenagers and their parents like it.

Ultralight aligners - the best aligners for bite alignment

1. American brand. The technology was developed by leading US specialists and meets all the canons of international quality.
2. 3D modeling of treatment. The correction plan is calculated using a computer program, which eliminates the risk of medical error when correcting occlusion pathology.
3. Control of the American side. After receiving the patient’s casts and the initial correction scheme, all information is duplicated in the Ultralight office for verification by American colleagues.
4. Manufacturing of aligners at the Skolkovo Innovation Center. In the laboratory of the innovation center, a powerful and high-precision 3D printer creates sets of aligners from biopolymer.
5. Save time. The patient receives Ultralight aligners within a few days after the jaw line impressions are taken and can immediately begin wearing clear aligners to straighten teeth.

Advantages of transparent aligners for correcting malocclusion

• Convenient – ​​a mouthguard for straightening teeth in adults does not reduce the clarity of speech, does not injure mucous tissue, and is hardly noticeable in the mouth.
• Invisibility - even at a distance of three steps it is difficult to notice the transparent overlay on the teeth of your interlocutor, friend, colleague.
• Safety - aligners fit the teeth, but do not require attachment to the enamel, so there are no cases of damage, abrasion, or decalcification.
• Easy to care for - unlike braces, aligners can be easily cleaned with toothpaste and a soft-bristled brush, and rinsed with water.

Disadvantages of aligners

Every system has its downsides. The unique format of correction with aligners, as well as the materials used, impose their own limitations. Disadvantages of transparent aligners:

1. Price. The price depends on the number of products for bite correction and, in case of serious pathologies, exceeds the cost of braces.
2. Limited effectiveness. Complex and advanced malocclusions are treated only with braces or combined techniques.
3. High level of responsibility. The patient himself controls the wearing time - at least 20-22 hours a day.

Price of mouth guards for sports: what affects the final cost?

When choosing a mouth guard, everyone is interested in one more question – the price, or how much money you will have to spend on the purchase. A good mouth guard for boxing cannot be too cheap, because its production is a process that requires time and professionalism. Cheap products are of low quality and also quickly need to be replaced.

How much a mouthguard costs for boxing and other sports is influenced by:

• Material of manufacture.
• Design features.
• Manufacturer brand.

We recommend trusting trusted brands, and also paying special attention to the characteristics of the equipment (material, thickness, dimensional data and much more). After all, a quality product is the key to your safety during sports.

Why adults and children choose clear aligners to straighten teeth

A teeth aligner for adults is simply irreplaceable:

Teens like aligners because:

What types of mouth guards are there and how to choose them?

Globally, all mouth guards are divided into 2 types:

• standard. They are also static. They are of a given shape. These are pads that have already been given a certain shape at the factory, which the mouthguard can never change. They are cheaper, but if a fighter has a non-standard jaw or “fenced” teeth, it may simply not fit or not perform its functions;
• thermoplastic. This is a “semi-finished product” of the lining, which still needs to be “prepared” (as they say “welded”) for use. When exposed to heat, such a mouthguard softens and is able to take the shape of a particular person’s jaw, taking into account all its characteristics. Professional wrestlers and boxers love such mouthguards, because safety comes first in competitions.

Professional video tips for choosing mouth guards:

Mouth guards or braces: what to choose to correct your bite

The therapeutic effect of remotherapy

The results of prolonged demineralization, not subject to the necessary timely dental treatment, are:

• Cracks and damage in the structure of tooth enamel;
• Increased sensitivity;
• Development of carious processes;
• Destruction of the tooth structure.

Saturation of tissues with minerals helps prevent negative consequences. Therapeutic treatment provides:

• Creation of conditions for stimulation of the ion exchange system;
• Compensation for the missing volume of minerals;
• Correction of defects and strengthening of the enamel layer;
• Resistance to carious pathogens.

Preventive remotherapy is implemented in various ways, the choice of which is determined by the specifics and degree of development of the disease.

Treatment of malocclusion using aligners

The installation of a mouthguard is performed only on healthy teeth, so a mandatory step in the preparation of the dentition is the treatment of caries and pulpitis, plaque removal and professional cleaning.

In trusted Moscow dental clinics, the stages of bite correction in adults and children include:

1. Initial visit to the orthodontist. The doctor will evaluate the bite and condition of the teeth and refer you for a mandatory x-ray examination. The main goal of this stage is to determine the feasibility of installing transparent aligners and the possibility of correcting the identified malocclusion pathology.
2. Taking impressions and treatment planning. The orthodontist creates a 3D computer model and designs the correction step by step. The patient sees in the program how the position of the teeth changes and the dental rows are straightened. Simultaneously calculates the number of aligners and the amount for treatment.
3. Production of caps The period depends on the manufacturers. For Italian and American aligners manufactured abroad, patients wait up to 2-4 weeks. Orthodontic devices created in Skolkovo near Moscow are ready in a few days.
4. Get to know your aligners and get a replacement schedule for your aligners. The orthodontist teaches the patient how to put on and take off the aligners, explains the care technique, and explains when it is necessary to change one product and not another.
5. Aligners straighten teeth - wearing aligners and watching how the bite straightens every week.

Mouth guards made using neuromuscular technology

The neuromuscular mouthguard is a unique development of sports dentists; the device not only protects the athlete from injury, but also increases the strength of the shoulder girdle muscles by 30%. For the average person, this result seems implausible, but the effectiveness of neuromuscular mouth guards has been proven.

Scientific studies have found that athletes constantly clench their teeth during training and competition, which leads to tension in the muscles of the neck, shoulders and back. Unnecessary muscle tone leads to loss of energy, and this affects the athlete’s strength performance and reduces athletic performance. Neuromuscular mouthguards solve the problem - they allow you to fix the position of the lower jaw in such a way that the muscles are in a state of minimal tension at the moment of clenching the teeth. Thanks to this, the athlete’s muscular frame is stabilized, and the amount of energy required for victory increases.

These mouthguards are the most customized and expensive.

Our clinic’s specialists manufacture individual Dental Guard sports mouthguards (Agility Guard company) using neuromuscular technology in this way: electrodes are fixed on the client’s face and neck, which transmit a signal about the strength of muscle contraction to the computer screen. The athlete opens and closes his mouth, while the dentist, based on sensor readings, looks for a position in which muscle tension reaches a minimum value. When such a position is found, a mouth guard is made in the laboratory based on the impression and computer data.

What does a neuromuscular mouth guard provide to an athlete:

• Increases strength and endurance;
• Reduces sensitivity to pain;
• Improves accuracy and speed of movements;
• Prevents the impact force from being reduced when re-stressing.

Due to the fact that the mouth guard improves strength and speed performance, it is used by athletes in those sports where dental protection is not traditionally used. In this case, a mouth guard is made without a protective function; its purpose is to eliminate reflex overstrain of the muscles of the shoulders, back and arms.