Shape of Success (Ni-Ti ProTaper System)


New is well forgotten old

There is a huge range of opinions regarding the best methods for shaping and cleaning root canals and root canal systems. A review of the literature revealed significant disagreement on a range of fundamental clinical issues. Controversy continues regarding the sequence of root canal preparation, working length, and the use of the variety of files available. There is a complete lack of data regarding the amount of apical foramen expansion and suitable canal taper that would guarantee reliable three-dimensional cleaning and filling.

Confusion is growing when trying to identify and implement the best technologies and tools. No international agreement has been adopted either on the maximum effective concentration, temperature and volume of the irrigant, or on the cleaning ability of reagents in general. The greatest differences of opinion arise regarding the importance of lateral clearance depth, elimination of the smear layer and biofilm, and the impact of these factors on the success of endodontic treatment.

Of course, sooner or later basic scientific research will shed light on our practical experiences, but ultimately it is these clinical actions that determine professional success in treating a patient. More than 30 years ago, Dr. Herbert Schilder described the most predictable, reliable concepts and strategies for root canal preparation. Schilder Endodontics continues to serve as a guide on the path to professional confidence and success.

In his brilliant classic, Cleaning and Treatment of Root Canals, Schilder outlined 5 mechanical methods for shaping and cleaning root canals. Schilder showed that the dimensions of smooth, streamlined preparations will inevitably vary according to the anatomy of that particular root (Fig. 1). He noted that a well-designed canal has a “look” and greater potential for three-dimensional cleaning and obturation, which meets the biological goals of preserving critical teeth (Figure 2).

Rice. 1a. Visualizes root curvatures, external root concavities, and the anatomy of the root canal system

Rice. 1b. Enlarged view demonstrates that shaping promotes three-dimensional cleaning

Rice. 2. The step-by-step processing sequence makes it easier to shape and clean the root canals. Completed endodontic treatment is the basis for further periodontal treatment and prosthetics

Schilder's ingenious innovation was the use of a series of instruments to step-by-step shape the root canal: there is a strategic advantage to removing dentin from the coronal 2/3 of the canal before starting the preparation of the deeper and more complex apical region (Fig. 3).

Rice. 3. Endodontically treated maxillary first molar with five canals, each of which has a different anatomical configuration

Schilder shaping techniques are the standard against which other processing technologies are evaluated. This pre-expansion strategy differs significantly from the often used step-back and crown-down techniques. Each technique, described in different ways, offers something interesting and improves root canal preparation techniques. And, although the final shape of the root canal may theoretically be the same, all techniques differ significantly and each requires a different exact sequence of actions.

What follows is a brief overview of step-back, crown-down and pre-enlargement techniques.

Root canal preparation

In the early days of modern endodontics, there were many concepts, strategies, and techniques for root canal preparation. Over the past decades, dozens of tools for passing and shaping channels have appeared.

A breakthrough in clinical endodontics occurred with the transition from the use of a long series of stainless steel instruments and multiple Gates Glidden reamers to the use of nickel titanium instruments for root canal preparation. Regardless of the techniques used, the goals of mechanical root canal treatment were brilliantly defined almost 40 years ago by Dr. Herbert Schilder [1]. With the correct treatment algorithm, mechanical treatment of root canals should correspond to the biological goals of canal preparation, three-dimensional disinfection and obturation.

Preparation of root canals with instruments

In 1988, Walia introduced Nitinol, a nickel-titanium alloy for root canal preparation that is 2-3 times more flexible than stainless steel alloy, and for the same instrument sizes. A revolutionary result of the use of instruments made of nickel-titanium alloy was the ability to machine curved canals using continuous rotation. By the mid-1990s, the first commercially available nickel-titanium rotary instruments appeared on the market [3]. The following is a mechanical classification of the latest fifth generation of instruments.

Fifth generation

The fifth generation of canal preparation instruments differs in that the center of gravity and/or the center of rotation is shifted (Fig. 1).

Rice. 1. Cross section of the Pro Taper Next tool. Note the off-center mass of the tool, which reduces the degree of screwing into the channel, provides more space for sawdust and improves flexibility.

When tools with a similar shape are rotated, a mechanical wave of motion arises that moves along the entire length of the tool. Similar to the progressive taper of any ProTaper instrument, the offset center of gravity further minimizes friction between the instrument and dentin [13]. Also, this design improves the removal of sawdust from the canal and improves the flexibility of the active part of the Protaper Next tool.

The new ProTaper Next™ (PTN) system (Dentsply) features 5 instruments of varying lengths, labeled X1, X2, X3, X4 and X5. From 1 to 5 they are color coded to correspond to sizes 17/04, 25/06, 30/07, 40/06 and 50/06. The taper listed is not fixed across the entire working end of the ProTaper Next™ tool. ProTaper Next™ tools operate at 300 rpm. and torque from 2.0–5.2 N cm. However, the authors prefer a torque of 5.2 Ncm because this level of torque has been found to be safe as long as clinicians carefully create a carpet path and use gentle outward sweeping movements during progressive root canal preparation [14]. In the ProTaper Next™ technique, all instruments are used exactly the same and the sequence of use always follows the ISO color coding and is always the same, regardless of the length, diameter or curvature of the canal.

ProTaper Next™ preparation technique

As with any root canal preparation technique, great care must be taken to create straight access to each orifice. This involves widening, smoothing and finishing the internal axial walls. For estial access, the ProTaper Universal® system offers an optional instrument called the SX. The SX instrument is used with an outward sweeping motion to pre-expand the orifice, remove dentin triangles or create a more pronounced shape. A small hand instrument is initially used to widen and smooth the inner walls of the canal. Once the entire length of the root canal is patent, a continuous rotation instrument can be used to create a carpet path [15]. To be clear, a channel is only prepared when it is empty and has a proven smooth and repeatable carpet. Knowing the expected working length, in the presence of a viscous chelating agent, insert a #10 K-file instrument into the root canal and see how easily the instrument moves toward the apex. In shorter, wide and straight canals, the #10 instrument can be easily inserted to the full working length. Once the #10 tool has been confirmed to move freely to its full working length, the carpet can be further widened with either a #15 hand tool or specially designed tools such as the Pathfile™. The created carpet path provides sufficient space for machining to begin with the ProTaper Next™ X1 tool. In other cases, teeth requiring endodontic treatment may have longer, narrower, and more curved root canals (Figure 2).

Rice. 2. A tooth that serves as a support for a bridge in the lateral region and requires endodontic treatment. Pay attention to the orientation of the denture relative to the roots.

In such situations, the #10 instrument often does not penetrate the entire length of the root canal. It is generally not necessary to use #06 and/or #08 hand instruments in an attempt to immediately reach the apical foramen. Simply and gently work the #10 hand instrument within any area of ​​the root canal until the instrument is completely free. ProTaper Next™ instruments can be used to create any part of the root canal with a smooth, reproducible carpet. The ultimate goal is to complete the entire working length of the root canal, establish the working length and check the apical patency (Fig. 3).

Rice. 3. Photo in progress: removal of the crown, isolation and #10 instruments inserted into the root canals, which have different curvatures.

Safe work with the canal can begin after checking the created carpet, when tool #10 does not stick at the working length and can slide and move again in the area of ​​the lower third of the root canal. When the canal is prepared, the access cavity is generously filled with a 6% NaOCl solution. You can begin canal preparation with the ProTaper Next™ X1. It should be emphasized that ProTaper Next™ instruments are never used in an inward pushing or pecking motion. Conversely, ProTaper Next™ tools provide an outward sweeping motion. Instrument X1 is inserted into the access cavity into the previously expanded orifice and prepared canal. Before meeting resistance, consciously begin sweeping outward movements (Fig. 4).

Rice. 4. Mechanical wave of motion moving along the active section of the Pro Taper Next X1 instrument.

Such movements create lateral space and allow this instrument to penetrate a few millimeters inside. Continue working with the ProTaper Next™ X1 along the main portion of the root canal. As you immerse the tool, for every subsequent few millimeters, remove it and examine it, while simultaneously cleaning the blades. Before re-inserting the X1 instrument into the root canal, it is strategically important to irrigate and flush out large sawdust, and reinsert the #10 instrument to break up the residual sawdust and debris into solution, then re-irrigate to refresh the solution. In one or more passes you should reach the working length of the X1 tool. For thorough mechanical preparation purposes, irrigate, recapitulate, and re-irrigate after removing any rotating instrument.

Take the ProTaper NEXT™ X2 and allow it to plunge into the root canal. Before resistance appears, apply lateral sweeping movements away from the dentinal walls. This in turn will move the X2 instrument into the root canal passively and progressively. The X2 tool will easily follow the path created by the X1 tool, making further expansion and gradually moving along the entire length.

If the tool gets stuck and stops moving, remove it, clean it and check the edges. Re-irrigate, recapitulate and re-irrigate. Continue working with tool X2 until working length is reached; note that one or more approaches may be required depending on the length, width and curvature of the canal (Fig. 5).

Rice. 5. Pro Taper Next X2 instrument inserted to the full working length into the mesiobuccal canal.

Once the ProTaper NEXT™ X2 has reached working length, it is removed. The created form can be considered final only if the grooves in the apical part of the instrument are visually filled with dentin. Alternatively, the apex size can be checked with a 25/02 hand instrument.

If the #25 hand instrument sticks at the working length, the preparation is complete. If the 25/02 hand instrument moves freely at working length, this means that the apical foramen is wider than 0.25 mm. In this case, the apex can be calibrated using a size 30/02 hand tool. However, if a #30 size hand tool does not reach the apex, proceed to the ProTaper NEXT™ X3 tool, following the same operating procedure as the ProTaper NEXT™ X1 and ProTaper NEXT™ X2. Most root canals will be in optimal shape after using ProTaper NEXT™ X2 or X3. ProTaper NEXT™ X4 and X5 instruments are primarily used for preparation and finishing of larger diameter root canals. If the apical foramen is determined to be larger than the ProTaper NEXT™ 50/06 X5 size, turn to other methods for preparing wide, straight canals. It is important to recognize that carefully prepared canals promote shaping, three-dimensional cleaning, and obturation (Figure 6).

Rice. 6. Temporary fixation of the bridge and the created shape of the root canals.

Conclusion

ProTaper NEXT™ is the 5th generation system that combines the proven performance characteristics of the past with the latest technological advancements. This system should simplify the procedure of canal formation with rotary instruments, reducing the number of instruments and eliminating the so-called hybrid techniques. From a scientific perspective, evidence-based studies are needed to confirm the potential benefits of the system.

Acknowledgment: The authors would like to acknowledge Dr. Michael J. Scianamblo for his work and participation in the creation of the ProTaper NEXT™ System.

At the time of publication of the article, the described product is at the registration stage.

Read the full article in the Dentsply News magazine.

Traditional shaping techniques

The step-back technique initially uses hand-held files of small ISO sizes to traverse the full length of the root canal. Larger files are then used to make apical preparations until the selected master file reaches working length. The remaining apical third of the canal is expanded with successively larger files, and as the file size increases, its working part is shortened. Upon completion of the preparation of the apical 1/3 of the canal, the coronal 2/3 is expanded, and the entire internal surface of the treated root canal is smoothed. Unfortunately, this technique has a number of disadvantages, for example: blocking the canal, formation of ledges, perforations, transportation (oval deformations of the apical foramen along the outer curvature of the root - translator's note), often requiring additional procedures, such as re-treatment, surgery and removal.

The crown-down technique uses ISO instruments of varying tapers from larger to smaller sizes until working length is achieved. In general, the root canal is opened in stages - from the coronal to the apical part. Although this technique avoids many of the disadvantages of the step-back technique, a few notes must be made:

  • each file aggressively penetrates dentin with its large, hard tip and, when rotated, forms a round profile in the center of the canal, while the cross section of the root canal most often has an irregular configuration; and, as a result, proper cleaning and disinfection of such root systems does not occur;
  • the taper of the prepared canal quickly follows the uniform taper of the file, especially in long, narrow and curved canals, which can lead to tight contact of the instrument with the canal walls, blocking and breakage;
  • the likelihood of breakage of smaller instruments increases when they become jammed in the apical third of the canal.

The pre-enlargement technique uses suitably curved ISO instruments of varying tapers from smaller to larger sizes. In cases of narrow and severely curved canals, instruments are initially selected to expand the coronal 2/3 of the canal. Each subsequent larger file is immersed to a shorter length relative to the previous instrument, cutting off dentin and creating a streamlined access in the coronal and middle parts of the canal. And although the instruments are used from smaller to larger, their flexible tips move freely and safely through the treated area of ​​the root canal. It is important to note that depending on the degree of bend, any ISO file will cut a cavity larger than its taper suggests. Each instrument cuts dentin with its larger, stronger, more active cutting threads in an outward motion. Correct step-by-step implementation of the pre-enlargement technique facilitates access to the anatomically more complex apical third of the canal: the finishing files move freely into the root canal cavity and act predictably in the apical region. This technique places emphasis on widening the coronal and mid-portions of the canal and smoothing the transition to the apical third of the preparation. Finishing the channel is a matter of skill (Fig. 4).

Rice. 4. Endodontically treated first maxillary premolar with a branched system ending in three apical foramina

The growing popularity of the pre-expansion technique is understandable due to the predictable success of the result. However, the disadvantages of the method include the use of a large number of tools, several recapitulations with a set of files and examples, significant time costs and a complicated processing procedure. Let us next consider a clinical technique based on the effective principles of pre-enlargement technology with significant time savings.

Machine channel expanders ProTaper NEXT, 3 pcs, X1-X5

NEW GENERATION OF THE GOLD STANDARD OF ENDODONTIC TREATMENT. The PROTAPER NEXT system is the latest development of the PROTAPER UNIVERSAL system from DENTSPLY Maillefer, which has been the gold standard in endodontic treatment for many years. This is an effective solution for dentists who need a comprehensive and functional solution that would be suitable for most clinical cases. The handles are color-coded (for choosing the order of use of the instrument), like all endodontic instruments.

ProTaper (tapers) are files with a progressive taper, designed for the treatment of difficult and severely curved root canals.

PROTAPER NEXT is suitable for most clinical situations, including more complex situations.

  • The unique "wave" motion and increased flexibility of the instrument allow for the treatment of even narrower and more curved root canals.
  • More reliable: The risk of instrument fracture is significantly reduced, while at the same time it preserves the original anatomy of the root canal much better.
  • Faster: Fewer steps in the protocol and high cutting efficiency of the instrument reduces root canal processing time.
  • “Wave” Movement: The unique off-center, rectangular cross-section allows the instrument to move in a wave-like, rocking motion, thereby creating more space for the removal of dentin chips while the instrument is better centered in the root canal.
  • M-WiRE: M-WIRE Nickel-Titanium alloy increases tool flexibility while maintaining cutting performance.
    It also makes tools more resistant to cyclic fatigue, which is the main cause of tool failure. Compared to market leading brands. Articles for ordering (3 pcs/pack):
    Length 21 mm
  • A080322100103, X1, 21 mm
  • A080322100203, X2, 21 mm
  • A080322100303, X3, 21 mm
  • A080322100403, X4, 21 mm
  • A080322100503, X5, 21 mm
  • A08032219A003, X1-X3, 21 mm (assorted 1 piece X1, X2, X3)
    Length 25 mm
  • A080322500103, X1, 25 mm
  • A080322500203, X2, 25 mm
  • A080322500303, X3, 25 mm
  • A080322500403, X4, 25 mm
  • A080322500503, X5, 25 mm
  • A08032259A003, X1-X3, 25 mm (assorted 1 piece X1, X2, X3)
    Length 31 mm
  • A080323100103, X1, 31 mm
  • A080323100203, X2, 31 mm
  • A080323100303, X3, 31 mm
  • A080323100403, X4, 31 mm
  • A080323100503, X5, 31 mm
  • A08032319A003, X1-X3, 31 mm (assorted 1 piece X1, X2, X3)

Selecting Ni-Ti files

This technique uses specially designed ProTaper files with uneven taper; The set includes 6 tools - 3 for shaping (Shaping, hereinafter S) and 3 finishing (Finishing, hereinafter F), which simultaneously repeats and simplifies the Schilder technique. Each S-file usually has some smoothing of the cutting angle (increasing taper along the length of the cutting part); while the taper of the F-file in the apical part is fixed, and on the coronal 2/3 of the length, on the contrary, it is reduced. When used correctly in a step-by-step manner, ProTaper files (Dentsply Tulsa Dental; Tulsa, Oklahoma) are effective, reliable, and easy to use (Figure 5).

Rice. 5. Root canals of a maxillary molar treated with ProTaper instruments. ProTaper files replicate significant canal curvatures well and produce smooth, streamlined shapes (work courtesy of Dr. John West, Tacoma, Washington).

The ProTaper technique closely replicates Schilder's technology, in which pre-curved reamers sequentially cut dentin in a reciprocating motion. S-files with non-aggressive small tips are held in the center of the canal previously traversed with hand instruments. Thanks to the increasing taper, each successive file selectively cuts dentin with its most effective cutting edges, without affecting the apical region.

Shaping using the ProTaper technique

High-quality endodontic treatment requires creating an access in which the instrument slides effortlessly along the axial walls and easily penetrates the orifices of the root canals (Fig. 6). To facilitate shaping and cleaning of root canals, it is recommended to initially widen the coronal 2/3 of the canal and then prepare its apical third.

Rice. 6. Access to the coronal part of the tooth prepared for prosthetics. Note the distinct shape, smooth axial walls and orifices of the four root canals

Passage of coronal 2/3

After creating a straight line, the pulp chamber is filled with lubricating gel. Based on the preliminary ISO 10/.02 and 15/.02 radiographs, hand files are measured and curved according to the expected total length and curvature of the root canal. Although in this technique the instruments are initially limited to only the coronal 2/3, hand 10 and 15 files can be used throughout the entire length of the canal as long as its patency is maintained. The length that a number 15 file can freely penetrate is set on the ProTaper S1 and S2 instruments.

Shaping coronal 2/3

The completed area of ​​the root canal can be optimally expanded by sequentially using S1 and S2 files. Before the procedure begins, the pulp chamber is filled with a concentrated solution of sodium hypochlorite (NaOCl). The S-file is passively inserted into the canal without apical pressure and cuts dentin with a gentle back-and-forth "inside-out" motion. To optimize the efficiency and safety of work, the instrument is used as a “broom”, that is, with a light lateral touch, the file selectively removes dentin in a reverse motion, creating additional lateral space that facilitates the advancement of the file deeper into the root canal. Strategically, such “shaving” actions are very effective in cases of burrs, narrowed areas and various irregularities of the root canal. If the ProTaper file becomes stuck in the canal, remove it and observe the location of debris on the incisal edge to better represent the area of ​​the canal that needs treatment. After using each S-tool, rinse the canal, recapitulate with a 10 hand file to remove sawdust, and rinse again. So, without apical pressure, in several steps, treat the S1 and then S2 ProTaper canals with files to a free immersion depth of 15 hand files.

Passage of apical 1/3

After shaping the coronal 2/3 of the root canal, attention should be focused on the procedure for processing the apical 1/3. The sequence is as follows: the pulp chamber is filled with lubricating gel, the apical third of the canal is expanded to at least a size 15 hand file, the full working length is confirmed, and the patency of the root canal is established. At this time, a choice must be made between machine or manual finishing of the apical area. If the new straight 15 file passively reaches working length without effort, rotary instruments should be used. However, for certain anatomical irregularities of the canal, when reciprocating movements are required to achieve a working length of 10 and 15 files, it is more advantageous to use pre-curved hand-held ProTaper instruments.

Shaping the apical 1/3

The pulp chamber is filled with sodium hypochlorite (NaOCl) solution. The root canal is processed sequentially with ProTaper S1 and S2 files to the full working length until the apical foramen is reached, similar to the procedure described above. Depending on the length, diameter and curvature of the root canal, one to several passes of S1 and S2 files are required. After each use of a rotating instrument, it is necessary to rinse the canal, remove sawdust with a 10-file file and rinse again. When treating curved root canals, the working length should be regularly rechecked due to possible straightening of the canal. The preparation is completed using finishing files: the ProTaper F1 file is passively inserted into the canal, in one or more steps, until the apical foramen. Upon reaching the working length F1, the instrument is removed from the canal and its apical turns are examined for filling with dentin. The presence of dentin is a visual confirmation of the shaping of the root canal. After using the F-file, flush the canal, recapitulate and check for patency, then flush the canal again to remove debris.

Finishing Criteria

Once preparation is completed with the 20/.07 F1 file, the size of the apical foramen should be assessed using the 20/.02 hand file as a sizing tool to check whether it is stuck in the root canal when reaching full working length or whether it is slipping deeper. If this file becomes stuck when reaching full working length, the canal is well formed and, after proper irrigation, is ready for filling. If the 20 hand file slips deeper, you should use a 25/.02 calibration hand file. If the 25 file gets stuck when reaching its full working length, then shaping the root canal is considered completed and filling can begin. If a 25 hand file slips in the root canal, proceed to the 25/.08 F2 or 30/.09 F3 ProTaper instruments, each time checking the apical foramen diameter with the same sized hand files. In cases of wide, straight root canals, if the 30 gauge file slips deeper, complete the apical preparation with alternative Ni-Ti rotary systems or hand instruments. The root canal prepared with the ProTaper technique is easily fitted with a corresponding ProTaper gutta-percha master pin for obturation using the hot vertical condensation method (Fig. 7).

Rice. 7a. Root canals of a mandibular molar treated with ProTaper files and 3D obturated. Note the smooth shapes, curvatures in the apical third of the canals, and multiple lateral branches (art courtesy of Dr. Jason West, Tacoma, Washington)

Rice. 7b. Mandibular second molar endodontically treated with ProTaper instruments, showing smooth planar canal curvatures (art courtesy of Dr. Dominique Martin; Paris, France)

Rice. 7c. Maxillary premolar prepared with ProTaper files. The shapes of the enlarged canals closely match the original ones (art courtesy of Dr. Michael Ribera; Washington, DC)

The sequence of the technique is always the same, regardless of the anatomical configuration of the root canal to be treated (Fig. 8).

Rice. 8. Protocol for using the ProTaper technique. The sequence of actions is constant regardless of the length, diameter or curvature of the root canal

Protaper Next – ROOT CANAL PREPARATION

FIFTH GENERATION OF INSTRUMENTS

In the early days of modern endodontics, there were many concepts, strategies, and techniques for root canal preparation. Over the past decades, dozens of tools for passing and shaping channels have appeared. Despite the different shapes of instruments, their number and the many proposed techniques, endodontic treatment was approached with optimism, hoping for success.

A breakthrough in clinical endodontics occurred with the transition from the use of a long series of stainless steel instruments and multiple Gates Glidden reamers to the use of nickel titanium instruments for root canal preparation. Regardless of the techniques used, the goals of mechanical root canal treatment were brilliantly defined almost 40 years ago by Dr. Herbert Schilder (1). With the correct treatment algorithm, mechanical root canal debridement should meet the biological goals of canal preparation, three-dimensional disinfection and obturation (Figure 1). The purpose of this article is to demonstrate and compare new generations of endodontic nickel titanium instruments designed to improve root canal preparation. It is important that this article will define a new tool system that combines proven design features of the past with the latest innovations of the present, and the operating technique will also be described.

PREPARATION OF ROOT CANALS WITH NI-TI INSTRUMENTS

In 1988, Walia introduced Nitinol, a nickel-titanium alloy for root canal preparation that is 2-3 times more flexible than stainless steel alloy, and for the same instrument sizes. A revolutionary result of the use of instruments made of nickel-titanium alloy was the ability to machine curved canals using continuous rotation. By the mid-1990s, the first commercially available nickel-titanium rotary instruments appeared on the market (3). Below is a mechanical classification of each generation of instruments. Rather than describe the myriad of tool cross-sections that exist, we will differentiate between tools with passive and active cutting capabilities.

FIRST GENERATION

To appreciate the evolution of nickel-titanium tools, it is useful to know that the first generation of nickel-titanium tools had passive radial cutting edges and fixed tapers of 4% and 6% along the entire length of the active blades (Figure 2) (4). This generation required a variety of instruments to achieve dissection goals. In the mid to late 1990s, GT (Dentsply Tulsa Dental Specialties) instruments were introduced which had a fixed taper on each individual instrument of 6%, 8%, 10%, and 12%. The single most important design feature of the first generation of nickel-titanium rotary instruments was the passive radial edges, which allowed the instrument to remain centered in the curvature of the root canal during operation.

SECOND GENERATION

The second generation of nickel-titanium rotary instruments entered the market in 2001 (6). The main difference with this generation of instruments is that they have active cutting edges and only a few instruments are required to complete a complete root canal preparation (Figure 3). To avoid the locking cone and resulting screw-in effect associated with passive and active tapered NiTi instruments, EndoSequence (Brassler USA) and BioRaCe (FKG Dentaire) offer instrument lines with alternating contact points (7). Although this characteristic is intended to reduce the effect of the locking cone, these lines of tools have a fixed taper in the area of ​​the active cutting part. A clinical breakthrough occurred when the ProTaper (Dentsply Tulsa Dental Specialties), which features multiple increasing and decreasing tapers throughout a single instrument, was introduced to the market. This revolutionary progressive taper shape limits the cutting action of each instrument to a specific portion of the canal, allowing the use of a shorter sequence of instruments to safely reproduce the Schilder canal shape (Figure 4) (8).


During this period, manufacturers began to actively seek methods to increase tool fracture resistance. Some manufacturers have used electropolishing on their tools to remove surface irregularities created by the traditional tool grinding process. However, clinical observations and scientific research have shown that electropolishing dulls cutting edges. As such, the observed benefits of electropolishing were offset by the need to apply unwanted pressure inside the root canal to advance the instrument to its full working length. Excessive internal pressure, especially when using fixed-taper tools, results in a locking cone effect, a screw-in effect, and excessive torque on the rotating tool during operation (9). To compensate for the shortcomings or ineffective operation of the tool as a result of electropolishing, other cross-sections of the tools were proposed and the rotation speeds, despite all the dangers, were increased.

THIRD GENERATION

Improvements in the metallurgy of nickel-titanium alloys have become the hallmark of the third generation of instruments for mechanical root canal preparation. In 2007, manufacturers focused on heating and cooling processes for alloys to reduce cyclic fatigue and improve safety when using nickel-titanium instruments in more curved root canals (10). The desired point of phase transition between martensite and austenite can be identified with the search for a clinically more optimal metal than nickel-titanium. This third generation of nickel-titanium instruments is characterized by a significant reduction in cyclic fatigue and, accordingly, instrument fracture. Examples of heat-treated instruments include Twisted File (SybronEndo), Hyflex (Coltene Whaledent), and GT, Vortex, and WaveOne (Dentsply Tulsa Dental Specialties).

FOURTH GENERATION

Another progressive movement in canal preparation is reciprocation, which can be defined as any repeated back-and-forth or up-and-down movement. This technology was first introduced in the late 1950s by French dentist Blanc. Today, M4 (SybronEndo), Endo Express (Essential Dental Systems), and Endo-Eze (Ultradent) are examples of systems where the clockwise rotation angle of the instrument is equal to the counterclockwise rotation angle of the instrument. Compared to full rotation systems, a reciprocal instrument that rotates at equal angles clockwise and counterclockwise requires more pressure into the root canal to move forward, does not cut as efficiently as a rotary instrument of the same size, and is more limited in removing sawdust and debris from the root canal. channel.


Based on these early experiences, reciprocation technology has steadily evolved, leading to the creation of the 4th generation of root canal preparation instruments. This generation of instruments and reciprocation technology are embodied in the much-anticipated one instrument. ReDent-Nova (Henry Schein) introduced the Self-Adaptive Instrument (SAF). This instrument has the shape of a compressible hollow tube; it is assumed that the instrument exerts uniform pressure on the dentinal walls, regardless of the cross-section of the canal. The SAF instrument is mechanically rotated by a tip that makes both short 0.4 mm vertical movements and vibration movements with constant irrigation (11). Another promising single tool technique is called One Shape (Micro Mega), which will be mentioned below in the chapter on 5th generation tools. By far the most popular single instrument concept is the WaveOne (Dentsply Tulsa Dental Specialties and Maillefer) and Reciproc (VDW) system. WaveOne combines the best design features of 2nd and 3rd generation tools with a reciprocal motor that rotates any tool back and forth at unequal angles. The angle of movement counterclockwise is 5 times greater than the angle of movement clockwise, and it is less than the elastic limit of the tool. After 3 cycles of counterclockwise and clockwise rotations, the tool will make a full circle or 360º rotation (Figure 5). This new reciprocal movement allows the instrument to advance easily, cut effectively and efficiently remove sawdust from the root canal (12).

FIFTH GENERATION


The fifth generation of canal preparation instruments differs in that the center of gravity and/or the center of rotation is shifted (Figure 6). When instruments with a similar shape are rotated, a mechanical wave of motion is generated that moves along the entire length of the instrument. Similar to the progressive taper of any ProTaper instrument, the offset center of gravity further minimizes friction between the instrument and dentin (13). Also, this design improves the removal of sawdust from the canal and improves the flexibility of the active part of the Protaper Next tool. The advantages of tools with a shifted center of gravity will be described later in this article. Trade names for instruments based on this technology are Revo-S, One Shape (Micro Mega) and ProTaper Next (Dentsply Tulsa Dental Specialties/Dentsply Maillefer). Today's safest, most effective, and simplest tool systems utilize the time-tested features of past generations of tools combined with the latest technological advances. Below is a brief technical description of the ProTaper Next system.

  • PROTAPER. NEXT


The new ProTaper Next (PTN) system (Dentsply Tulsa Dental Specialties) features 5 instruments of varying lengths for root canal preparation, sequentially labeled X1, X2, X3, X4, and X5 (Figure 7). From 1 to 5 they are color coded - yellow, red, blue, double black and double yellow stripes on the handle, corresponding to sizes 17/04, 25/06, 30/07, 40/06, and 50/06, respectively. The taper listed is NOT fixed across the entire working portion of the ProTaper Next tool. Imagine that the ProTaper Next X1 and X2 instruments have both an increasing and decreasing taper throughout the same instrument, while the ProTaper Next X3, X4, and X5 instruments have a fixed taper for the first 3 mm of length and then a decreasing taper on the entire remaining active part. ProTaper Next tools are a combination of 3 significant design features such as increasing taper on the same tool, M-wire technology and an off-center section. Taking the ProTaper Next X1 as an example, it has a centered mass and axis of rotation over the first 3mm of length, whereas from 4-16mm the X1 has a displaced cross-section. From 1 to 11 mm, the X1 instrument increases its taper, starting at 4%, while from 12 to 16 mm there is a decreasing taper to improve instrument flexibility and preserve root dentin during root canal preparation procedures. ProTaper Next tools are used at 300 rpm. and torque from 2.0-5.2 N cm. However, the authors prefer a torque of 5.2 Ncm because this level of torque has been found to be safe as long as clinicians carefully create a carpet path and use gentle outward sweeping movements during progressive root canal preparation (14). In the ProTaper Next technique, all instruments are used exactly the same and the sequence of use always follows the ISO color coding and is always the same, regardless of the length, diameter, or curvature of the canal.

PROTAPER NEXT PREPARATION TECHNIQUE

The ProTaper Next preparation technique is extremely safe, effective and simple, provided the access cavity is good and a carpet is created. As with any root canal preparation procedure, great care must be taken to create straight access to each orifice. This involves widening, smoothing and finishing the internal axial walls. For estial access, the ProTaper system offers an additional instrument called the SX. The SX instrument is used in an outward sweeping motion to preliminarily widen the orifice, remove dentin triangles, move the coronal portion of the canal away from the outer curvature of the root, or create a more pronounced shape. Perhaps the greatest challenge in endodontic treatment is finding, following and predictably maintaining the shape of the root canal to the apex. Traversing and maintaining the shape of the canal using fine hand instruments requires mechanical strategy, an experienced sense of work, patience and desire. A small hand-held instrument is initially used to reconnoiter, widen and smooth the inner canal walls. Once the entire length of the root canal is passable with a hand instrument, a continuous rotation instrument can be used to create a carpet and widen the original canal lumen in preparation for shaping (15). To be clear, a channel is only prepared when it is empty and has a proven smooth and repeatable carpet. With an estimated working length and in the presence of a viscous chelating agent, insert the #10 file instrument into the root canal and see how easily the instrument moves toward the apex of the root canal. In shorter, wide and straight canals, the #10 instrument can be easily inserted to the full working length. Once the #10 instrument is confirmed to move freely to its full working length, the carpet can be further widened with either a #15 hand instrument or specially designed instruments such as PathFiles (Dentsply Tulsa Dental Specialties). The created carpet path provides sufficient space for machining to begin with the ProTaper Next X1 tool. In other cases, teeth requiring endodontic treatment may have longer, narrower, and more curved root canals (Figure 8a). In such situations, the #10 instrument often does not penetrate the entire length of the root canal. It is generally not necessary to use #06 and/or #08 hand instruments in an attempt to immediately reach the apical foramen. Simply and gently work the #10 hand instrument within any area of ​​the root canal until the instrument is completely free. ProTaper Next instruments can be used to create any part of the root canal with a smooth and reproducible carpet.


Although there is a glide path and a sequence of instrumentation, the ultimate goal is to complete the entire working length of the root canal, establish the working length, and check for apical patency (Fig. 8b). Safe work with the canal can begin after checking the created carpet, when tool #10 does not stick at the working length and can slide and move again in the area of ​​the lower third of the root canal. When the canal is prepared, the access cavity is generously filled with 6% NaOCl solution. You can begin canal preparation with the ProTaper Next X1. It should be emphasized that when working with ProTaper Next instruments, pumping or pecking movements directed inward are never used. In contrast, ProTaper Next tools are used in an outward sweeping motion.


It is important that this method of use will allow any ProTaper Next tool to move passively inwards, following a carpet path and penetrating the entire working length. Instrument X1 is inserted into the access cavity into the previously expanded orifice and prepared canal. Before meeting resistance, consciously begin sweeping outwards (Figure 8c). Sweeping creates lateral space and allows this tool to penetrate a few millimeters inside. Sweeping movements serve to improve the contact between the instrument and the dentin, especially in canals that have a non-standard cross-section.

Continue working with the ProTaper Next X1 along the main part of the root canal. As you immerse the tool every next few millimeters, remove it and examine it while simultaneously cleaning the blades. Before re-inserting the X1 instrument into the root canal, it is strategically important to irrigate and flush out large sawdust, and reinsert the #10 instrument to break up the residual sawdust and debris into solution, then re-irrigate to refresh the solution. In one or more passes you should reach the working length of the X1 tool. For thorough mechanical preparation purposes, irrigate, recapitulate, and re-irrigate after removing any rotating instrument.


Take the ProTaper Next X2 and let it sink into the root canal. Before resistance is encountered, apply a lateral sweeping motion away from the dentinal walls, which in turn will move the X2 instrument into the root canal passively and progressively. The X2 tool will easily follow the path created by the X1 tool, making further expansion and gradually moving along the entire length. If the tool gets stuck and stops moving, remove it, clean it and check the edges. Re-irrigate, recapitulate, and re-irrigate to meet channeling goals. Continue working with tool X2 until working length is reached; note that one or more approaches may be required, depending on the length, width and curvature of the canal (Figure 8d).


Once the ProTaper Next X2 has reached working length, it is removed. The created form can be considered final only if the grooves in the apical part of the instrument are visually filled with dentin. Alternatively, the apex size can be checked with a 25/02 hand instrument. If the #25 hand instrument sticks at the working length, the preparation is complete. If the 25/02 hand tool moves freely at working length, this simply means that the apical opening is wider than 0.25 mm. In this case, the apex can be calibrated using a size 30/02 hand tool. If the #30 size hand tool sticks at the working length, the mold is created. However, if a #30 size hand tool does not reach the apex, move on to the ProTaper Next X3 tool, following the same operating procedure as with the ProTaper Next X1 and ProTaper Next X2.

Most root canals will be in optimal shape after using ProTaper Next X2 or X3 (Figure 8e). The ProTaper Next X4 and X5 instruments are primarily used for the preparation and finishing of larger diameter root canals. If the apical foramen is determined to be larger than the ProTaper Next 50/06 X5 size, consider other methods for preparing similar wide, straighter canals. It is important to recognize that carefully prepared canals promote shaping, three-dimensional cleaning and obturation (Figure 8f).

DISCUSSION

From a clinical point of view, the Protaper Next continuous rotation system combines the most proven and successful design features of past instruments with the latest advances in science. This brief discussion will describe how design affects instrument performance. The most successful design feature of the previous generation of instruments was the mechanical concept of using progressive taper on the same instrument. The patent protecting the ProTaper Universal system allows the use of both increasing and decreasing taper percentages on the same tool. This structural feature minimizes contact between the instrument and the dentin, which reduces the risk of a locking cone and screw-in effect, increasing work efficiency (8). Compared to a fixed taper instrument of the same size, decreasing the percentage of instrument taper improves flexibility, limits preparation of the root canal body, and preserves dentin in the coronal 2/3 of the root canal. Taking advantage of the mechanical design, Protaper Next also uses progressive taper on the same tool. This design feature has contributed significantly to the ProTaper system becoming the #1 selling system in the world, the #1 tool of choice for endodontists, and the #1 system of choice for undergraduate dental school education at international schools (16). Another design feature that benefits certain brands of rotary tools is metallurgy. Although nickel-titanium tools are 2-3 times more flexible than stainless steel tools of the same size, additional modifications to the manufacturing process in the form of heat treatment can provide certain benefits. The company's specialists turned their attention to the heating and cooling of a traditional nickel-titanium alloy, either before or after milling. Heat treatment creates a more optimal phase transition point between martensite and austenite. It must also be remembered that the best phase transition point depends on the cross section of the tool. Research has shown that M-wire, a metallurgically enhanced version of nickel-titanium alloy, reduces cyclic fatigue by 400% compared to tools of the same diameter, cross-section and taper. This third benefit of this generation of instruments is strategic for the overall clinical safety and performance of the Protaper Next rotary instrument system. The third design feature of Protaper Next tools is the off-center cross section. If the main part of the continuous rotation tool is off-center, we can talk about 3 advantages of this (13):


1) The off-center design promotes the formation of a moving mechanical wave of motion along the entire active part of the tool. This rocking motion promotes minimal instrument-to-dentine contact compared to a fixed-taper, mass-centered rotation instrument (Figure 9). The reduced contact limits unwanted locking taper, screw-in effects, and torque on any instrument. 2) An offset tool frees up more space for improved cutting, loading and removal of sawdust from the root canal compared to a mass-centered tool with a rotary axis (Figure 9). Many tools break as a result of excessive accumulation of sawdust and debris between the cutting blades throughout the active part of the tool. Importantly, the off-center instrument reduces the likelihood of lateral compaction of sawdust and blocking of the root canal anatomy (Figure 6).


3) A forming tool with an off-center rotation mass will create a mechanical wave of motion similar to vibrations recorded along a sinusoid (Figure 10). As a consequence of this design, any Protaper Next instrument can create a greater range of motion compared to a similar instrument with symmetrical mass and rotation axis (Figure 6). The clinical advantage of this is that the smaller, more flexible Protaper Next instrument can prepare a similar space to a larger, more rigid instrument with a centered mass and axis of rotation (Figure 9).

CONCLUSION

Each new generation of shaping tools offers something new, is described differently and is intended to be more advanced than the previous one. Protaper Next is a 5th generation system that combines the proven performance characteristics of the past with the latest technological advances. This system should simplify the procedure of canal formation with rotary instruments, reducing the number of instruments and eliminating the so-called hybrid techniques. Clinically, the channel shape created by Protaper Next fulfills the 3 sacred dogmas - safety, effectiveness and simplicity. From a scientific perspective, evidence-based studies are needed to confirm the potential benefits of the system. Acknowledgments: The authors would like to acknowledge Dr. Michael J. Scianamblo for his work and participation in the creation of the ProTaper Next system. Disclaimer: Drs. Ruddle, Machtou, and West benefit financially from the products they create and develop, including the ProTaper Universal system.

Authors:

Clifford J. Ruddle, DDS Pierre Machtou, DDS John D. West, DDS

Bibliography:

1. Schilder H: Cleaning and shaping the root canal, Dent Clin North Am 18:2, pp. 269-296, April 1974. 2. Walia HM, Brantley WA, Gerstein H: An initial investigation of the bending and torsional properties of Nitinol root canal files, J Endod 14:7, pp. 346-351, 1988. 3. Thompson SA: An overview of nickel-titanium alloys used in dentistry, Int Endod J 33:4, pp. 297-310, 2000. 4. Bryant ST, Dummer PM, Pitoni C, Bourba M, Moghal S: Shaping ability of .04 and .06 taper ProFile rotary nickel-titanium instruments in simulated root canals, Int Endod J 32:3, pp. 155-164, 1999. 5. Kramkowski TR, Bahcall J: An in vitro comparison of torsional stress and cyclic fatigue resistance of ProFile GT and ProFile GT Series X rotary nickel-titanium files, J Endod 35:3, pp. 404-407, 2009. 6. Machtou, P, Ruddle CJ: Advancements in the design of endodontic instruments for root canal preparation, Alpha Omegan 97:4, pp. 8-15, 2004. 7. Schäfer E, Vlassis M: Comparative investigation of two rotary nickel-titanium instruments: ProTaper versus RaCe. Part 2. Cleaning effectiveness and shaping ability in severely curved root canals of extracted teeth, Int Endod J 37:4, pp. 239-248, 2004. 8. Ruddle CJ: The ProTaper endodontic system: geometries, features, and guidelines for use, Dent Today 20:10, pp. 60-67, 2001. 9. Boessler C, Paque F, Peters OA: The effect of electropolishing on torque and force during simulated root canal preparation with ProTaper shaping files, J Endod 35:1, pp. 102-106, 2009. 10. Gutmann JL, Gao Y: Alteration in the inherent metallic and surface properties of nickel-titanium root nickel root canal instruments enhance performance, durability and safety: a focused review, Int Endod J 45:2, pp . 113-128, 2012. 11. Metzger Z, Teperovich E, Zary R, ​​Cohen R, Hof R: The self-adjusting file (SAF). Part 1: respecting the root canal anatomy—a new concept of endodontic files and its implementation, J Endod 36:4, pp. 679-690, 2010. 12. Yared G: Canal preparation using only one Ni-Ti rotary instrument: preliminary observations, Int Endod J 41:4, pp. 339-344, 2008. 13. Hashem AA, Ghoneim AG, Lutfy RA, Foda MY, Omar GA: Geometric analysis of root canals prepared by four rotary NiTi shaping systems, J Endod, 38:7, pp. 996-1000, 2012. 14. Blum JY, Machtou P, Ruddle CJ, Micallef JP: Analysis of mechanical preparations in extracted teeth using the ProTaper rotary instruments: value of the safety quotient, J Endod 29:9, pp. 567-575, 2003. 15. West JD: The endodontic glidepath: secret to rotary safety, Dent Today 29:9, pp. 86, 88, 90-93, 2010. 16. Dentsply International, personal communication. 17. Johnson E, Lloyd A, Kuttler S, Namerow K: Comparison between a novel nickel-titanium alloy and 508 nitinol on the cyclic fatigue life of ProFile 25/.04 rotary instruments, J Endod 34:11, pp. 1406-1409, 2008.

Buy Protaper Next at a low price in the online store

06.08.2015

Confirmation of clinical success

Clinical studies of the ProTaper technique, with an emphasis on the execution procedure, were conducted on the mesial roots of extracted mandibular molars using CT analysis. In this study, horizontal sections of different root levels were examined using CT sections and spatial imaging. Some results are shown in Fig. 9. Green represents the anatomical contours before instrumentation and red represents the resulting preparation shape.

Rice. 9a. Horizontal CT sections of the coronal 1/3 of the root. Pay attention to the successful relocation of channels at this level

Rice. 9b. Horizontal CT sections of the middle 1/3 of the root. Note the rounded, centered preparation of the ProTaper files

Rice. 9c. Horizontal CT sections of the apical 1/3 of the root. ProTaper preparation ideally includes the original canal diameter

Rice. 9d. Condition before and after applying ProTaper S1, S2 and F1 files. Smooth, streamlined and centered preparation shapes follow the internal anatomy of the canal

Results 9a-9d kindly provided by Dr. Lars Bergmans and BIOMAT Research Cluster, Catholic University of Leuven, Belgium

So, ProTaper S-files, thanks to easy lateral sliding and selective cutting of dentin during the reverse movement, demonstrate a number of advantages:

  • instruments move freely in the root canal during most of their work;
  • the lumens of the canals in the coronal part delicately expand away from the outer concavity of the root;
  • The “shaving” method of processing ensures centering of the preparation in the root canal and maximum preservation of dentin;
  • instruments are in physical contact with more than 90% of the inner walls of the canal.

Prospects

Starting this year, the production of ProTaper instruments under the name ProTaper Universal will begin again (Fig. 10). There will be 2 additional finishing files F4 (40/.06) and F5 (50/.05) for the preparation of large canals and the convenience of those dentists who prefer to further expand anatomically smaller root canals. Other modifications include shifting the transition angle between the safe tip of the file and the first cutting turn, equalizing the balance of file performance in a particular series, electropolishing, increasing the length to 31 mm and increasing the flexibility of larger F-files. The goal of these modifications is to cover the maximum variety of anatomical situations and, very importantly, to reduce the perceived need for hybrid technology among dentists.

Rice. 10. ProTaper instruments demonstrate significant progress in the efficiency and reliability of root canal treatment. Rotary ProTaper files can be easily converted to manual files using color-coded snap-on handles

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]