Niko implants are worthy alternatives to foreign analogues

In the market of dental products intended for high-quality implantation, artificial roots of the Niko brand are allocated to a special category of products.

The domestic manufacturer took care of their quality and accessibility to wide sections of the population of a multinational country. The competitiveness of Niko implants is determined not only by price, but also by some advantages of orthopedic products.

History of appearance

The correct choice of structures designed for high-quality restoration of the integrity and aesthetics of the dentition eliminates the development of complications and rejection of structures.

The Rusimplant LLC team, together with German specialists, developed the RGS “NIKO” dental implant system, which quickly gained the trust of implantologists and their patients.

Innovative developments began to be mass-produced in 2009. Niko implants are in great demand these days.

They are not inferior in performance characteristics to products from foreign manufacturers, allow high-quality orthopedic procedures and cost much less than imported designs.

The cost of Niko implants is 2-3 times lower than their foreign counterparts.

To what extent do LIKo implants satisfy consumer requirements?

Having studied consumer reviews about Rusimplant implants, the following can be said about the product of NIKO DENTAL GmbH:

  • the speed of delivery of all structural elements allows us to solve the problem with implantation in the shortest possible time;
  • the experience of specialists and the use of modern technologies have a positive effect on the final result;
  • high quality does not affect the price (affordable);
  • there are many positive reviews about the ethical type of implants (they do not differ from natural teeth);
  • reliable;
  • no additional procedures are required on adjacent dental units.

Many consumers also note the price side of LIKo implants. On average, the price varies from 9 to 15 thousand rubles. Of course, this will depend on the clinic and the scope of the problem, but even such prices are affordable for many segments of the population.

NIKO DENTAL GmbH is a leader in the field of implantology. LIKO implants are of high quality and reasonable price. This is an excellent alternative to expensive foreign analogues.

Sources used:

  • Misch, Carl E (2007). Contemporary Implant Dentistry. St. Louis, Missouri: Mosby Elsevier.
  • Dental implantology. Surgical aspects / Michael S. Block. - M.: MEDpress-inform, 2015.
  • Unclassified materials. Illustrated manual on dental implantology (photo album): monograph. / A.I. Zhusev. - M.: Natalis, 2012.

Production Features

The production of Niko systems is based on the use of high-tech equipment from Switzerland, Japan, Germany, and high-quality materials developed by leading specialists.

The team’s responsible approach to completing assigned tasks and showing concern for their compatriots allows us to create ideal supports for orthopedic structures and carry out prosthetics at a high professional level at competitive prices.

The creation of each model of the RGS “NIKO” dental construction system begins with the development of drawings of exclusive products.

The decision to use titanium, purified from impurities and inclusions of other chemical elements, as well as surgical steel as the main material for the manufacture of artificial roots, made it possible to obtain high-quality artificial roots for the installation of prostheses , biocompatible with the tissues of the oral cavity.

Sandblasting and acid etching of the surface can improve the hygiene of products. To prevent the development of bacterial pathogenic microflora, Niko implants are treated with UV rays, ensuring a high degree of sterility. Double special packaging ensures safe transportation of products to customers and a high percentage of hygiene.

Advantages of Antogir dental implants and their unique features. Read here what are the main differences between Xive implants.

Follow the link https://dr-zubov.ru/implantaciya/proizvoditeli/ankylos/universalnost-i-kachestvo-nemeckix.html if you are interested in the design of Ankylos implants.

C-Tech Implants

The Italian brand C-Tech is represented in more than 30 countries around the world. The company uses the best advanced technologies, offering unique solutions for smile restoration, developed together with highly qualified surgeons in Europe.

Etiotropic prevention includes the following groups of measures:

The product range includes a wide selection of not only conventional implants with diameters from 3 to 7 mm, but also mini-implants with very small diameters from 1.8 to 3 mm.

Table 1. Types of C-Tech implants

Line name Characteristic
Line El Conical implants with cervical microthreads, providing excellent primary stability.
ND line Implant with a diameter of 3 mm with aggressive threading. Suitable for narrow spaces.
Line MB Single-component implant with a diameter of 3 mm. Available in two models, which are selected depending on the structure of the bone and soft tissue in the upper and lower jaws.
Line GL Conical implant with internal hexagonal connection.
SD line Mini implants with a diameter of 1.8 to 2.5 mm. Models have aggressive or fine threads.

Design features

Titanium supports for orthodontic structures are characterized by strength, reliability, and long service life.

Their intraosseous parts have a cylindrical shape. The presence of a persistent thread makes it possible to ensure uniform loads on the bone tissue.

The places where they connect to the abutment are distinguished by a hexagonal shape, which eliminates the risk of rotational movements of the body.

The use of a unique technology for processing products makes it possible to obtain a special microrelief, which increases the bioinertness and biotolerance of Niko brand implants.

The superstructures differ in length, the presence or absence of protrusions, and have a straight and inclined design. The types of superstructure determine the possibilities of the lateral or transocclusal method of fixing the supports.

When installing Niko screw implants, a classic two-stage method of implantation into bone tissue is used. The ability to fix temporary supports with straight or spherical heads for installing dentures allows you to solve aesthetic and functional problems of the oral cavity in the absence of individual teeth during the implantation procedure.

Niko rods can be used for patients with diminishing or porous bone tissue, as well as immediately after amputation of teeth.

Application of IRIS implants in practice

The IRIS LIKO-M implant is widely used in private dental practice. In addition, from 2013 to 2016. An experiment took place at the Department of Maxillofacial Surgery and Implantology of the Nizhny Novgorod State Medical Academy and five clinics in Moscow and Nizhny Novgorod. 369 patients with partial and complete loss of teeth were treated, and 969 dental implants of the IRIS system were installed. The purpose of the study is to evaluate, from a scientific point of view, the long-term results of orthopedic treatment of patients. The implantologists were pleased with the results. The postoperative period was calm, without inflammation. Bone resorption in the cervical area around the implants 3 years after the end of treatment was no more than 1 mm - this corresponds to generally accepted international standards. There was not a single case of removal or fracture of IRIS implants, or violations of screw fixation of prostheses.

The lineup

offers a wide range of Niko implant models. They allow the installation of artificial roots in severe clinical cases and the choice of the best options that meet the wishes and financial capabilities of patients.

Each model has a registration number, which is protection against counterfeiting and confirms the quality of the design.

Standard

Models of the “Standard” series have been successfully implanted for more than 10 years. The structures have the form of cylinders with a thrust thread of a trapezoidal shape.

A step of 0.8 mm ensures stable placement of the implant and also eliminates the risk of displacement of the product in the vertical plane.

The rounded base provides a unique opportunity to perform one-stage implantation with bone grafting.

Standard plus

Production began after improving the surface design of the commercially produced type of implants of the “Standard” series.

The improvement made it possible to use artificial roots for one- and two-stage implantation with increased softness of the bone tissue.

Review of implant models from the Baikon catalog and their purpose. In this article we will tell you when the use of basal implants is justified.

Here https://dr-zubov.ru/implantaciya/proizvoditeli/alpha-bio/kachestvennoe-vosstanovlenie-ulybki-izrailskimi.html you will find out how reasonable the price of Alpha Bio implants is.

Lux

The series is distinguished by double threads with a tooth profile in the form of isosceles triangles. Its step size on the main body of the structure is 0.75 mm.

The micro-thread on the top of the rod has a pitch of 0.25 mm. Installation is permissible regardless of the condition of the jaw bone tissue and the size of the alveolar ridge.

The unique structure of the implants meets the requirements for biochemical load and allows for high-quality orthopedic treatment . A fine thread pitch can provide a high percentage of stabilization of the rod in the bone, eliminating the risk of its destruction.

Leader

It is an improved model of the “Lux” and “Standard Plus” series implants. The cone-shaped shape of the landing rod and the dodecahedron for installing the prosthesis are distinguished by the possibility of self-sealing , which reduces the time for healing of gum incisions.

Easy insertion into the bone due to the large aggressive and fine six-start thread facilitates the installation of supports in difficult clinical cases.

Compaction of the hard tissue of the jaw occurs along the entire length of the product. The surface is processed using SLA technology.

The video provides a description of the Leader model.

Short

The Short series is used in complex clinical cases. It is characterized by its small length, the ability to eliminate the risk of damage to vital structures of the oral cavity.

Shortened rods can have a diameter of 5.5 mm and 6.0 mm, and are distinguished by a three-start aggressive thread and a beveled shoulder.

SLA technology was used for surface treatment. Design features ensure uniform load distribution on the bone and its integrity.

Small

Recommended for implantation of frontal areas against the background of a narrow alveolar ridge.

The design features include the function of combining the plug screw and the gum former , double thread, which ensures maximum stabilization in the bone and rapid adaptation to it.

Assets

Used in cases of low bone quality. Distinctive characteristics include a unique design with self-sealing properties of the internal seat body and hexagon.

The bone column that forms inside the implant ensures its reliable fixation in the hard tissues of the jaw. There are no problems with the blood supply inside it.

Learn more about the Active series from the video.

Solo

The Solo series is recommended for a one-stage implantation procedure with the installation of temporary structures.

The models guarantee a reduction in patient discomfort and recovery time after surgery. Their installation is recommended if the condition and volume of bone tissue are satisfactory in accordance with the requirements for the simultaneous implantation procedure.

Mini

The designs belong to a series of temporary models, where the outer diameter is 2.0 mm. Models with a ball-shaped head are designed for installing removable dentures.

Implants with a cone-shaped head are used to fix fixed orthopedic structures.

High-quality fixation in the tissues of the jawbone is due to the microrelief of the surface layer and the self-sealing function.

There is no risk of developing allergies or rejection. The length of the products is produced in three options: 10, 13 and 16 mm.

Features and benefits of Niko implants

  • Simplicity and reliability of design . The implants are made of high-tech titanium alloy, and their design is quite simple, which ensures the reliability of the system and its durability. The design features of the system also prevent rotation about its own axis and loosening of its components, as well as displacement relative to the bone and each other.
  • Good primary stabilization . After implantation, the Niko system is clearly fixed and firmly held in the bone bed, and the load is evenly distributed over its entire surface.
  • Functionality . High rates of osseointegration of the system, its good fixation, and reliable design of the connection with the superstructures determine the appropriate functionality of artificial teeth. They do their job perfectly and can last up to 25 years.
  • Aesthetics . Artificial teeth installed on Niko implants allow you to create a complete replacement for your “native” ones. In terms of their aesthetic indicators, they are practically in no way inferior to more expensive prosthetic options.
  • Availability . The cost of Niko implant systems is relatively low, which makes them accessible to patients with different income levels, including the elderly and pensioners, who most often face the need to restore lost teeth.
  • Excellent price/quality ratio . The high quality of Niko implants, good functional and aesthetic characteristics, combined with low cost, make them one of the best dental implants on the market in terms of price/quality.

* * *

Niko implants mean simplicity of design, reliability, high functional and aesthetic results of implantation. Another undeniable advantage is their low cost. All this makes this implantation system one of the most popular and in demand not only in Russia, but also in many European countries. In this price segment, few manufacturers of implantation systems can compare with Liko implants in terms of price/quality ratio. This is an ideal budget option for installing artificial teeth for most patients.

We have been working with Niko implants for more than 10 years, so we are well familiar with the installation procedure and long-term results of implantation. This allows us to recommend Niko implants to our patients as a reliable, durable and inexpensive option for installing artificial teeth. for installation of Rusimplant in our clinic is 43 thousand rubles. This is a “turnkey” price, that is, it includes the cost of all necessary components for implantation (implant, gum former, permanent abutment, crown), as well as the surgical and orthopedic stages of work. If you need the installation of two or more implants, you can take advantage of a promotional offer: the installation of one implant will cost you 38 thousand rubles, and this is also a turnkey price.

Installation procedure

Implantation is a serious undertaking; it consists of a preparatory, surgical, and orthopedic stage.

It begins with performing an orthopantogram and choosing a system that takes into account the characteristics of the dentofacial apparatus, the quality and size of the bone tissue.

The subsequent algorithm of the doctor’s work includes the following actions:

  • gum incision;
  • bed preparation;
  • installation of an implant without a supragingival part;
  • placing sutures on the gums to isolate the system from the stresses that arise when chewing food;
  • making a re-incision of the gum;
  • installation of the former;
  • creation of a bed;
  • installation of abutment;
  • production of a prosthesis and subsequent fixation on an artificial root.

Two to six months pass between the first and second incisions. During this period, it is forbidden to load the gums.

Indications

  • Extended defects of the dentition in the lateral sections of the upper arch;
  • reconstruction of the dentition after traumatic deformation or partial resection of the jaw due to an oncological process;
  • complete edentia of the upper jaw;
  • terminal recession of the maxillary bone with a decrease in height, thinning of the alveolar process;
  • proximity of the maxillary sinuses, nasal sinuses;
  • impossibility or inappropriateness of bone grafting;
  • reluctance to wear removable dentures.

Life time

Practice shows that during the period of using RGS “NIKO” dental implant systems for 5-10 years, provided that all necessary hygienic procedures were performed, no cases of their rejection or destruction were identified.

According to the results of the company's scientific tests, the maximum service life of the structures is 25 years.

When did IRIS LIKO-M implants appear?

The abbreviation IRIS stands for Innovative Russian Implantation System of Dental Implants LIKO-M. The first implant was developed in 1995 by a team of scientists led by Doctor of Medical Sciences, Professor, Corresponding Member of the Russian Academy of Sciences Sergei Yuryevich Ivanov. The scientific basis of the IRIS LIKO-M system is 55 dissertations defended under his leadership. All of them relate to implantology in one way or another. IRIS is an evolution of the LIKO-M system, which has been successfully used for more than 20 years. Has an international certificate of ISO 9001-2000 standard.

Price

The catalog presents the following prices for NIKO dental implant systems.

Implant seriesUnit price in rublesTurnkey service cost in rubles
1."Standard"450035000–50000
2."Standard Plus"4800–520035000–50000
3."Lux"5200–570045000–60000
4."Leader"600050000–70000
5."Short"600050000–70000
6."Small"4000–450035000–50000
7."Assets"600050000–70000
8."Solo"4000–450035000–50000
9."Mini"3800–410035000–50000

A system of discounts applies when ordering large quantities of products, and holding promotions in dental clinics across the country allows for implantation at lower prices and saving the family budget when restoring the dental system.

Price

Installation of a domestic implantation system will cost less than foreign analogues. This is due to the absence of large expenses for transportation. However, the characteristics of the implants are at a very high level. Here are the average prices for Rusimplant models in clinics in the capital.

Implant modelCost in rub.
Mini4200
Small4500
Standard4500
Solo4700
Leader, Short, Active6000
Standard Plusup to 10000
Luxup to 15000

A brand with half a century of history

Nobel Biocare is a pioneer in the field of implantology. The company was founded by Swedish scientist Per-Ingvar Brånemark, who discovered the process of osseointegration in 1952. He studied the features of hematopoiesis and conducted an experiment by attaching an instrument in a titanium case to a rabbit’s leg. When it came time to remove it, it turned out that the titanium could not be separated from the bone. Thus, the ability of this metal to connect with bone tissue was discovered.

Branemark's revolutionary discovery became the starting point in the development of implantology. Already in 1965, he installed the first titanium dental implant in history - to carpenter Gust Larsson, who had completely missing teeth in the lower jaw, the upper jaw was deformed, he had difficulty speaking and eating, while experiencing severe pain. The man no longer hoped to return to a full life, but from his dentist he learned about Professor Brånemark’s research. He came to him himself and became the first volunteer to have 4 implants installed and a prosthesis fixed on them.

Nobel implants served the first patient, Gust Larsson, for more than 40 years (!)

.

Shortly after the installation of the world's first dental implant, Nobelpharma was created, later renamed Nobel Biocare. Under Brånemark's leadership, it developed actively, conducted extensive research and continuously improved its products.

In terms of significance for patients, the discovery of Nobel implants in the world can be compared with the Nobel Prize

, which is awarded to the best minds for discoveries in the field of science.

Apparently there is a tendency to call only the best and most prestigious as Nobel.

Rating
( 1 rating, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]