Teeth filing - about the procedure and whether it can be done at home

Date of publication: 09/28/2018

Tooth filing has been used in dentistry since the 19th century. At that time, the procedure helped treat caries by mechanically removing damaged tissue. Today the technique is used to eliminate other problems, mainly aesthetic ones.

For example, teeth can be filed if one or more units stand out from the general row due to their increased length. Filing can also help with small chips on the edges of the tooth.

In what cases is tooth filing used?

There are different opinions about the advisability of the procedure. It is mainly carried out in the following cases:

When the upper incisors or canines stand out too much. This not only disrupts aesthetics, but can also interfere with proper bite. In this state of affairs, the teeth can be shortened a little so that they fit better into the dentition.
If there are small chips on the edges of the teeth. A slight grinding of the enamel will help smooth out the edge.
If there are sharp corners. Sometimes, due to anatomical features, the front teeth may have protruding parts. They may not look aesthetically pleasing or even damage the cheek.
For orthodontic bite correction. Sometimes teeth are filed down on the sides to make it easier to move them into the correct position. This is important when installing braces if your teeth are very crowded.
Filing down the front of the teeth is used when installing veneers. The teeth are also ground down before crowns are installed.

The advisability of filing is determined individually only at the appointment of a specialist.

Crooked teeth are not a death sentence

With the onset of a certain age, people often come to the understanding that it is time to change something. Including in appearance. Modern plastic surgery can correct any mistakes of nature, erase traces of years and fatigue from the face. It's sad when all your efforts are ruined by an ugly smile.

Along with cosmetic manipulations, bite correction in adults becomes an important step on the path to transformation and gaining self-confidence. A good orthodontist can help straighten teeth for patients of any age.

Expert opinion

Roman Borisovich Alekperov

orthopedic dentist

Experience: 24 years

If there are indications for filing teeth, it is important to entrust this procedure to an experienced dentist who will correct the aesthetic defect and not cause harm to the teeth. Self-filing is impossible and extremely dangerous - you can seriously damage the tooth, and in the future you will have to resort to microprosthetics or crown prosthetics. There is also a high risk of injury to the mucous membrane and infection.

How dangerous is crooked teeth in adults?

Now you know what ways there are to correct your bite in adulthood. If you want to transform your appearance, qualified dental orthodontists will help you!

But what happens if bite defects are not corrected? Are crooked teeth so harmless, even if they don't bother you? This is not an idle question, and here's why.

Even if you are not currently concerned about aesthetics, crooked teeth can cause a lot of trouble in the future. First there will be problems with oral hygiene. The accumulation of bacteria and plaque in hard-to-reach interdental spaces will lead to the development of caries, which will be difficult to notice. The process of tissue destruction will deepen, which can lead to pulpitis, the development of an inflammatory process in the roots and, as a result, tooth loss, destruction of bone tissue, impaired diction and facial deformation. And that's not the worst thing. Anomalies of the dental system can cause a number of disorders in the functioning of the masticatory muscles and the temporomandibular joint. As a result, difficulties with chewing food, excessive abrasion of teeth, and disturbances in the gastrointestinal tract. As you can see, crooked teeth can ruin not only a smile, but also affect the health and appearance of an adult.

While some people invent problems for themselves and try to correct even ideal proportions, others do not notice obvious defects and put their health in serious danger.
Don’t put off visiting a qualified orthodontist. A good doctor will assess the actual condition of the patient’s teeth and suggest the most effective way to solve the problems. ←Return to list of articles

How is filing done?

The technology varies depending on the purpose for which the procedure is performed. The process includes a number of steps:

- Diagnostics. The doctor determines which teeth will be filed and for what purpose. To do this, a visual inspection is carried out, the cause is studied, and the method of performing the procedure is determined.
— The area in which manipulation is necessary is determined. For this, carbon paper, wax plates, and special aerosols can be used. This helps to highlight or color an area that, for example, prevents the jaws from closing properly. In difficult cases, a plaster model of the jaw can be made.
If the procedure requires significant removal of hard tissue, anesthesia is performed.
Sawing is done using a diamond bur. On chewing teeth, a small layer of enamel on the protruding tubercles can be filed away. If we are talking about incisors, the movements are multidirectional and depend on the situation.
After the procedure, the surface that was manipulated is polished. Also, remineralizing substances can be applied to the surface of the teeth, as well as compositions to strengthen the surface and reduce sensitivity.

When filing teeth, the thickness of the enamel in the treated areas changes. This may cause increased sensitivity. Usually this is a temporary phenomenon and in the first days it is necessary to refrain from eating hot and cold foods so as not to provoke discomfort and pain. If the problem does not go away over time, you should consult a doctor.

Teeth wear for physiological reasons

When does the process of tooth wear begin?
The process of wearing away tooth enamel begins almost immediately after teeth erupt. This is natural and normal, as it allows the body to adapt to the resulting load. Physiological abrasion is necessary so that the load on the teeth and jaws is distributed evenly and there is no overload of individual areas. Point contacts of teeth turn into planar contacts and the angle of inclination of the teeth changes. This is necessary for a more physiological functioning of the dentofacial apparatus.

It is important to understand that proper physiological tooth wear affects only the outer enamel, without damaging the inner dentin, and occurs only at the points of contact of the teeth.

Wearing of baby teeth in children

Not only molars and permanent teeth in adults wear out, but also baby teeth in children. By about four years of age, the child’s teeth on the incisors, as well as the cusps on the canines and chewing teeth, completely wear out. It is considered normal for the enamel to wear away by the age of six, even down to the dentin.

And in the period until the complete change of baby teeth - up to 13-14 years, the dentinal layer may also be worn out.

Increased abrasion is considered when the tooth cavity becomes visible or the tooth crown is lost.

Online consultation with a doctor

If you are interested in questions about teeth filing, you have been prescribed this procedure, but have doubts about its necessity, or are simply concerned about the condition of your teeth, then it is best to undergo an examination and get advice from a dentist. Under no circumstances should you do the filing yourself. A specialist will assess your dental health, listen to complaints and give professional recommendations. Without a competent opinion, you can complicate the situation, which will lead to illness or already have hidden illnesses. Treatment will be more expensive and, in some cases, longer. At the consultation, the vector of your next actions will be set and doubts will be dispelled.

At home

Fear of doctors and thoughts about the pain of professional manipulations often lead to patients trying to cope with the existing problem on their own. Teeth filing is also no exception.

Dentists share their experience that people often come to appointments whose enamel has been severely damaged by attempts to cut off part of it with various improvised tools in the desire to improve the aesthetic appearance of the jaw row with prominent front teeth or the presence of chips.

In addition to the problem of high sensitivity, these patients experience cracks in the hard tissue, as well as dentin damage, which develops as a result of bacteria entering the dentinal tubules through open pores.

The consequence of such independent actions can be the development of caries, pulpitis and numerous complications that can lead to partial or complete tooth destruction.

Dentists categorically prohibit performing teeth filing procedures at home. Only a specialist can determine the need for an operation to remove a section of enamel and carry it out efficiently, without the risk of complications.

Grinding of teeth for a crown in the gingival area

The edge of the artificial crown in relation to the marginal gum can be located above, at the level of, or extend into the dental gingival sulcus. In the first case, the periodontium is not damaged, but aesthetics suffer. It is possible to compensate for this drawback by introducing the edge of this structure into the groove, but not more than half its depth, which avoids trauma to the dental-gingival attachment.

Another feature of this site is the preparation of the ledge. This is a kind of step that allows you to make an aesthetic and fairly thick edge of an artificial crown. In addition, its edge, ending at a ledge, does not have a harmful effect on the gum, does not push back or injure it. Also, this preparation technique increases the mechanical strength of the installed structure. The ledge can be flat, trough-shaped or beveled at an angle of 135◦. The latter is the most common.

Causes of pathological abrasion

There are several main reasons for the development of abrasion pathology, and in the first place among them are bad human habits. For example, the habit of gnawing seeds, holding small objects in the mouth (pins, cloves, pipe mouthpiece), love for foods with high acidity may well become catalysts for the process.

Often the cause of increased abrasion is diseases: bruxism, diseases of the gastrointestinal tract, nervous, cardiovascular, endocrine systems, from the side of the TMJ - malocclusion. The cause may also be improper dental treatment - an incorrectly manufactured orthopedic design can provoke severe abrasion of the antagonist tooth.

Sometimes the cause of pathology may be the chosen profession. Some employees of the metallurgical, cement, granite industries, and representatives of the mining workshop suffer from increased abrasion.

Purposes of preparation

In the process of turning teeth for crowns, the following is created:

Prosthetic space for construction;
The support stump is of a shape that will provide conditions for the application and fixation of the prosthesis;
Correct relationship between the edge of the artificial crown and the periodontium.

Each of the above points is very important in the process of functioning of the structure. Prosthetic space is necessary to prevent overbite. The correct shape of the ground tooth will ensure the longest and most durable cementation. And it is worth mentioning separately about the correct interaction with the periodontium.

Modern and classic classification of abrasion

In modern Russian practice, the most widespread and popular is the Bushan classification of abrasion, which distinguishes:

✔

physiological abrasion (only enamel is affected);

✔

transitional (enamel + dentin suffers);

✔

pathological abrasion (dentin is damaged).

The benefit of the classification is that, in addition to the degree of pathology, it considers the surfaces (vertical, horizontal) that have undergone changes, the prevalence of the disease and the tooth sensitivity accompanying the process.

As for the types of pathological abrasion, the classical classification was developed by A. G. Moldovanov and L. M. Demner. According to their data, the rate of abrasion is 0.402 mm per year.

The first degree of abrasion
is achieved by the age of 25-30 and is characterized by smoothing of the cusps and cutting edges of the teeth.

The second degree of abrasion
is observed in patients aged 44-50 years and is expressed in the abrasion of the enamel.

The third degree of abrasion
is noted if by the 50th anniversary the enamel limit has been reached and 10 pairs of chewing teeth have been preserved.

What are the types

There are two ways to carry out separation:

Mechanical - using a drill with diamond discs, strips or files, a thin layer of enamel (less than 1 mm) is removed from the side surfaces of the incisors.
Physiological - the interdental spaces expand naturally with the help of wedges, elastic bands, and threads that are inserted into them.

Both methods are practical, but the first method provides instant results. In the second case, you will have to wait several days, so mechanical separation is used more often than physiological separation.

Disadvantages of installing veneers without grinding

✔

Too thin lumineers, which do not require grinding of the teeth, are not able to effectively hide significant defects in the shape of the teeth.

✔

Thin veneers without grinding make teeth visually thicker, which negatively affects their aesthetics.

✔

Grinding allows you to create a correct and smooth transition of the veneer into the tooth tissue. Installing veneers without grinding the teeth can cause plaque accumulation, gum inflammation and the formation of caries in the cervical area.

How to straighten teeth without braces

Patients are often reluctant to get braces due to the long treatment period and the visual appeal of iron clasps. Bite correction using aligners has become a very popular procedure.

Aligners are trays made of transparent and elastic material that are applied to the entire dentition. The patient can take them off and put them on independently. The principle of their influence is imperceptible, gradual pressure on the teeth. This points them in the right direction. The material does not injure the gums, mucous membranes, enamel, and does not cause allergies.

At a consultation appointment at the Propricus clinic, the doctor will tell you in detail about this treatment. During the entire treatment period, the patient is given several sets of mouth guards. Aligners are prescribed if crowding or large gaps are diagnosed, if the jaw moves forward.

Before correcting a crooked tooth with mouth guards, you also need to sanitize your mouth. The aligners themselves can be cleaned with toothpaste and a toothbrush. There are no food restrictions. The only thing is that you need to remove the aligners before eating and then rinse your mouth.