Budget option for implantation if several teeth are missing


If 3 teeth are missing, the patient can be helped with a removable denture, dental bridge or implantation. Implantation of implants is the preferred option: it provides high aesthetics, preservation of adjacent elements and bone tissue (bone atrophy is stopped), reliability and durability. The choice of implantation method depends on the location of the defect.
  • When used:
    missing 3 teeth
  • Type of anesthesia:
    local anesthesia
  • Procedure time:
    from 45 minutes
  • Treatment period:
    up to 4 months
  • Healing period:
    up to 7 days
  • Age restrictions:
    from 18 years old

What is better if 3 teeth are missing - dentures or implants?

Let's look at possible recovery methods:

  • Bridge prosthesis
    A fixed structure consisting of several crowns is fixed to adjacent teeth with a special dental adhesive-cement. Before installing the prosthesis, the supporting units are depulped and ground. If there are no last teeth in the row, it will not be possible to install such a prosthesis, since there is no support.

  • Removable denture
    A structure consisting of artificial gums with soldered crowns, fixed on the gums, held by hooks to adjacent teeth. Prosthetics do not require filing or removing the nerve of nearby supporting teeth. But such fastening is unreliable; food particles get under the prosthesis.
  • Implantation
    In the absence of several elements, individual implants (titanium roots) are implanted into the “free” places, which are loaded with a fixed prosthesis on the 2-3rd day (with a one-stage protocol) or after the implants have healed (with classical implantation).

Implantation is the best way, as it provides:

  • safety of neighboring teeth - they do not need to be depulped and ground down;
  • aesthetic result - artificial teeth on implants are difficult to distinguish from natural ones;
  • bone preservation - with an implant, the bone tissue experiences stress and does not decrease in size;
  • reliability, durability - implants can withstand significant chewing loads and last 30 years or more with proper care.

Prosthetics of molars at the ILATAN clinic

Modern dentistry offers many durable solutions that provide maximum patient comfort while at the same time providing excellent aesthetic, functional and therapeutic results. When choosing a prosthetic restoration, we take into account the patient's existing conditions and expectations. By scheduling a free consultation with an orthopedist or implantologist at any of the ILATAN family dentistries by phone, you will find out which dental restoration option is right for you and can take advantage of high-quality dental services at affordable prices.

Implantation methods

  • Classical
    operation is carried out in two stages. A two-part artificial root is implanted (the implant and abutment are separate elements) by detaching the gum flap and suturing it into the bone. After 2-6 months, the gums are opened, and abutments are fixed to the implants. The implants are loaded with metal-ceramic or zirconium crowns. Until the titanium roots engraft, the patient wears a temporary removable denture. In case of bone deficiency, implantation is preceded by bone grafting (bone augmentation surgery).

1

Implantation

Implantation of 3 implants

Installation of a butterfly prosthesis or temporary crown (if it is possible to remove the bite)

4-6 months

2

Prosthetics

Installation of abutment and permanent crown

  • One-stage
    Monoblock implants are implanted (abutments and implants are inseparable) without detachment of the gingival flap - through a puncture in the gum. It is possible to install an implant in the socket of a newly removed unit. On days 2-3 after surgery, an adaptation prosthesis (with a titanium arch and plastic crowns) is fixed. After the artificial roots have engrafted, the temporary structures are replaced with permanent ones (with metal-ceramic or zirconium crowns). In a one-stage operation, implants are implanted into deep layers of bone that are not subject to resorption—bone grafting is not performed.

1

Implantation

Implantation of 3 implants

2 - 3 days

2

Prosthetics

Fixation of an adaptive prosthesis with a titanium arch and metal-plastic crowns

in a year

Permanent prosthetics

The choice of method for implanting three teeth in a row is determined after diagnosis and depends on the location of the defect (front or chewing teeth) and its extent.

Indications and contraindications for production

A butterfly denture is made in the following clinical situations:

  • Loss of 1-3 teeth in the front or side of the jaw;
  • The need for prosthetics for 2-3 teeth;
  • Partial edentia;
  • Absence of a tooth by nature;
  • Temporary replacement of a defect during the manufacture of a permanent structure;
  • Inability to perform prosthetics using other prostheses;
  • Presence of contraindications to implantation;
  • Patient's wishes.

Contraindications to prosthetics are:

  • Absence of more than 3 teeth in a row;
  • Severe tissue atrophy;
  • Periodontal diseases of adjacent teeth;
  • Stomatitis, acute inflammatory processes in the oral cavity;
  • Allergy to manufacturing materials (plastic, nylon);
  • Deformation or defect of the alveolar process;
  • Removal of the last molars, since their replacement is impractical.

How many implants are needed?

Possible options:

  • 2 classic (two-piece) implants are implanted along the edges of the defect, after healing they are loaded with a permanent prosthesis of 3 connected crowns (2 “sit” on the implants at the edges, 1 in the middle fills the void);
  • 3 classic (two-piece) implants replace missing teeth with individual implants and load them with separate crowns after implantation of artificial roots;
  • 3-4 monoblock (one-stage) implants on titanium roots immediately fix an adaptive prosthesis with a titanium arch and three welded crowns.

The choice of the number of implants depends on the location of the defect.

Operation and care

Hygienic care with a butterfly prosthesis is not complicated and consists of the following:

  • The structure must be cleaned every day, but it can be removed periodically at night;
  • In the evening, the denture should be removed and cleaned with a toothbrush and toothpaste or soap;
  • Place the cleaned product in a glass of water or a special cleaning solution;
  • You should brush your teeth as usual 2 times a day: morning and evening;
  • Particular attention should be paid to the places where the prosthesis is fixed, where the clasps are attached to natural teeth;
  • You should eat solid foods carefully; the butterfly may break if overloaded;
  • After each meal, it is recommended to rinse the mouth;
  • Once every 6 months you should visit the dentist for a preventive examination of the oral cavity and the integrity of the orthopedic structure.

The cost of the structure will depend on the material used, the number of missing teeth and the dental clinic. A prosthesis made of acrylic plastic will cost much less than one made of nylon.

Features and options depending on the location of the defect

Upper jaw

The jaw bone on top has a loose structure - more implants are required, and they take 1-2 months longer to take root than in the lower jaw. The bone tissue on top is smaller in height; after the loss of an element, it quickly atrophies. In addition, the maxillary sinuses are located close to the upper jaw, so implantation should be carried out with extreme caution.

When choosing a classic protocol for bone deficiency, bone grafting (sinus lift) and installation of 2-3 classical implants are required. As part of a one-stage protocol, 3-4 one-piece implants are implanted, eliminating bone grafting and shortening the treatment period.

Lower jaw

The bone tissue of the lower jaw has a less loose structure; implants take root here faster. The bone is not as susceptible to atrophy as the upper one, but with a long absence of teeth, the likelihood of active tissue destruction is high. In addition, surgery on the lower jaw is complicated by the proximity of the mandibular nerve, which is taken into account after a CT scan.

Installing three implants using a one-stage protocol is the best option for the lower jaw. Instant installation of an orthopedic structure allows you to speed up the healing of implants and reduce the number of dietary restrictions.

Front teeth

If three or more teeth are lost in the frontal area, 3 classic implants are installed, after which they are healed, single crowns are placed. The method helps to achieve a highly aesthetic result (artificial units look natural, an even gum contour is formed). In case of bone deficiency, bone grafting is performed.

It is not always possible to implant 3 monoblock implants within the framework of a one-stage protocol on the front teeth: an extended defect is needed to fix the products, and the frontal units are usually small in size. The fact is that titanium roots are installed at an angle (to avoid bone tissue buildup) - the roots of neighboring elements can be touched.

Chewing teeth

It is preferable to install monoblock implants (3-4 pieces) in place of 3 missing chewing teeth. Titanium roots are implanted at an angle into areas of “quality” bone, bypassing the roots of neighboring units. The implants are immediately loaded with a prosthesis consisting of 3 crowns.

You can install 3 classic implants, but the teeth in the chewing area are most subject to stress, and the likelihood of bone atrophy is high. When choosing a classical technique, bone tissue will need to be augmented before implantation.

Causes of edentia

The problem of missing teeth sooner or later arises in almost every person. However, the causes of edentia can be very different. It all depends on whether it is primary (lack of tooth germs as such) or secondary (loss of already formed teeth).

Primary causes of edentulismCauses of secondary adentia
  • Bad heredity and genetic diseases. The most common is ectodermal dysplasia, in the most severe form of which the fetus completely lacks the rudiments of all teeth. The absence of small molars and incisors is especially often “inherited”.
  • Diseases at the stage of embryonic development. Infections, problems with the endocrine system (pituitary dwarfism), disorders of mineral metabolism, etc. Also, the development of fetal tooth buds is influenced by the mother’s lifestyle, as well as illnesses suffered during pregnancy.
  • Caries and its complications (pulpitis, periodontitis, abscesses, etc.). One of the most common reasons is the absence of a tooth in the dentition.
  • Gum diseases (periodontitis, periodontal disease).
  • Mechanical injuries.
  • Age factor.

Operation stages

1. Consultation

The doctor listens to the patient, determines the condition of the teeth, gums and the advisability of implantation, and answers the patient’s questions.

2. Diagnostics

The patient is sent for an x-ray. A 3D computed tomography (CT) scan is performed. Helps to exclude contraindications and assess the volume and condition of bone tissue.

3. Preparation

They organize treatment of dental pathologies (if they are diagnosed), and carry out professional cleaning of the oral cavity.

4. Installation of implants

After anesthesia, the implants are implanted using the method of detaching the gum flap, followed by suturing the gums (with a two-stage protocol) or fixed through a puncture (with a one-stage implantation).

5. Prosthetics

If the operation is organized in 2 stages, 2-6 months after the implantation of titanium roots, the patient is fitted with permanent dentures with crowns made of zirconium dioxide or metal ceramics. While the bone is fused with the implants, the patient wears a temporary removable denture. In a one-stage protocol, the installed artificial roots are loaded with an adaptive prosthesis 2-3 days after surgery. Re-prosthetics with permanent structures are organized after a year.

Rating
( 2 ratings, average 4 out of 5 )
Did you like the article? Share with friends:
For any suggestions regarding the site: [email protected]
Для любых предложений по сайту: [email protected]